Menu Screen Composition - Hitachi HV-HD201 Operation Manual

camera.
23 23 23 23
GAIN switch
Sets the camera sensitivity.
0→3→6→9→12 dB→18 dB. The sensitivity setting is indicated by the combined GAIN LED indication.
Note: When CAM MODE AUTO or AGC ON,the -3dB GAIN LED indicated all the time.
24 24 24 24
WHITE BALANCE mode select switch
The white balance mode can be selected in the sequence PRESET → MEM →AUTO.
・ PRESET: Optimum white balance at 3200 K and 5600 K color temperature. Select between 3200 K
and 5600 K in the menu mode at W. PRST MODE of the MAIN MENU screen.
・ MEM : Press the A.WHT button
3200 K and 5600 K in the menu mode at W. MEM MODE of the MAIN MENU screen.
・AUTO : White balance is automatically adjusted in real time (ATW)
When the RC-Z3 white balance mode is set to MEM and AUTO, at the MAIN MENU, W. MEM MODE is
indicated and at PRESET, W.PRST MODE is indicated.
Note: When CAM MODE AUTO, camera white balance is automatic.
Selection from the RC-Z3 select switch is ineffective.
DTL switch
25 25 25 25
Camera detail setting.
Press the switch to select in the sequence VARIABLE→LOW→NORMAL→HIGH.
mode indicator LEDs show the detail amount; in the menu mode, the MAIN MENU screen DTL setting is
OFF or VAR. . . .
58
IRIS control
26 26 26 26
Adjusts the lens iris as follows.
・ AUTO : OVER-RIDE (fine adjustment about ±2 F-stops) can be adjusted
・ REMOTE: Adjustable in the range from fully open to fully closed
・ MANUAL: Iris is not adjustable from the RC-Z3 (adjust by manually turning the lens iris ring).
M. BLK control
27 27 27 27
Adjusts the master black level

2. Menu screen composition

Camera settings other than the RC-Z3 items can be customized using the main and special set menus.
The menu structure is same as one of camera.
Press the switch upward to select the sensitivity in the sequence
for automatic white balance adjustment. Select between
19 19 19 19
During VAR, the
59