Removing Water From The Tank - Mitsubishi Electric MJ-E26SX-A1 Instruction Manual

Removing Water from the Tank

The unit automatically shuts down and lights the Tank full lamp when the tank (approximately 5L) is full.
Empty the tank.
1
Remove the water tank.
Grasp handle and slide out
Hold the tank this way
2
Remove the tank lid, and empty.
Float
Do not remove
3
Reattach the tank lid and replace
the water tank.
Check that the lid and guard are secure. Slide the
tank in with both hands (you should hear a beep).
¡ Secure the lid and guard properly or
else the tank may become stuck.
¡ If the tank is not installed correctly,
the tank full light will come on, and
the unit will not operate.
Do not remove or dismantle the floating element in
the tank. If it is removed, the unit cannot detect
when the tank is full, and this could result in
leakage.
13
Tank Lid
Tank Guard
Empty water
from here
17