Removing Water From The Tank - Mitsubishi Electric MJ-E16SX-A1 Instruction Manual

Removing Water from the Tank

The unit automatically shuts down and lights the Tank full lamp when the tank (approximately 4L) is full.
Empty the tank.
1
Remove the water tank.
Open the front door
Grasp handle and slide out
<Hold the tank this way.>
2
Remove the tank lid, and empty.
water tank
Floating element
Do not remove or
dismantle the float.
3
Reattach the tank lid and replace
the water tank.
¡ If the lid is not properly closed, you
may have problems removing the
tank.
¡ If the tank is not installed correctly,
the tank full light will come on, and
the unit will not operate.
Do not remove or dismantle the floating element in
the tank. If it is removed, the unit cannot detect
when the tank is full, and this could result in
leakage.
13
Pour the water
out as shown.
Confirm that the lid is
securely attached to
the water tank, and
push the tank in.
Close the front door.
17