Removing Water From The Tank; Floating Element - Mitsubishi Electric MJ-E82CF-H Instruction Manual

Removing Water from the Tank

The unit automatically shuts down and lights the Tank full lamp when the tank (approximately 3.8L) is full.
Empty the tank.
12
1
Remove the water tank.
<Hold the tank this way>
Do not remove or dismantle the floating element in
the tank. If it is removed, the unit cannot detect
when the tank is full, and this could result in
leakage.
Open the front
door.
Grasp handle and
slide out.
2
Remove the tank lid, and empty.
Tank lid

Floating element

Do not remove or dismantle the float.
3
Reattach the tank lid and replace
the water tank.
Confirm that the lid is securely attached to
the water tank, and push the tank in.
Close the front door.
¡ If the lid is not properly closed, you
may have problems removing the tank.
¡ If the tank is not installed correctly, the
tank full lamp will come on, and the unit
will not operate.
Pour the water
out as shown.
21