Removing Water From The Tank - Mitsubishi Electric MJ-E26VX-A1 Instruction Manual

Removing Water from the Tank

The unit automatically shuts down and lights the Tank full lamp when the tank (approximately 5L) is full.
Empty the tank.
12
1
Remove the water tank.
Hold the tank this way
2
Remove the tank lid, and empty.
Floating element
Do not remove or dismantle the float.
Grasp handle and
slide out.
Tank lid
Tank guard
Pour the water
out as shown.
3
Reattach the tank lid and replace
the water tank.
Check the lid and guard are secure. Slide
the tank in with both hands (you should
hear a beep.)
¡ Secure the lid and guard properly or
else the tank may become stuck.
¡ If the tank is not installed correctly, the
tank full light will come on, and the unit
will not operate.
Do not remove or dismantle the floating element in
the tank. If it is removed, the unit cannot detect
when the tank is full, and this could result in
leakage.
21