Telnet Interface Commands; Troubleshooting; Contacting Hall Research - Hall Research Technologies HSM-I-08-08 User Manual

HSM-I-08-08
Figure-17 Putty client configuration
To use this interface, user must open TCP socket connection on port 6324. If PC is
used as client, please use Putty telnet client to communicate with matrix. Use figure-17
for configuring putty client on windows machine. Mac and Linux users can use default
telnet client.

6.1 Telnet Interface Commands

Telnet interface uses same commands as HSM serial (RS232) interface. Moreover, it
allows user to use all serial commands that are explained above in section 4. Expected
response is also same as serial interface command response.

7. Troubleshooting

There are no field serviceable parts or circuits in the device. Opening the device will
void the warranty. If you think the device is malfunctioning, please contact Hall
Research.

7.1 Contacting Hall Research

There are no user serviceable parts in the device. Opening the device will void the
warranty.
32