Hall Research Technologies HSM-I-08-08 User Manual page 30

HSM-I-08-08
5.2.3.3 Device sub tab
Please refer to Figure 16 below, for a typical screen of Device settings sub tab, as it
would appear on a Smart-Phone.
Figure 16 – Device sub tab
LCD Contrast
Change contrast of LCD on Matrix's front panel.
Active
Enable/Disable embed audio in HDMI signal. When checked, audio in HDMI output is
active (enabled). When unchecked, audio in HDMI output will be inactive (mute).
Factory Reset
This button loads factory defaults to Matrix. It will reset unit to factory default values.
Factory default will also wipe out saved presets.
Change Password?
Allow user to change existing password. When clicked, a new window will pop up for
entering the new password. Password length is limited to eight (8) characters long.
28