Telnet And Serial Commands (Port 6324) - Hall Research Technologies HSM-88-4K User Manual

Dd
automatically by enabling DHCP. In order to use the DHCP feature, you must
have a compatible DHCP ROUTER OR SWITCH that will assign the IP addresses
to the end devices.
(B) Setting STATIC IP
If your network doesn't support DHCP server function: Then you have to
change the IP addresses manually in the fields below.
IP: Select Static IP radio button and enter the IP address manually.

Netmask: Enter the subnet mask as assigned by your network

administrator.
Gateway: Enter gateway IP address for the device and the PC.

Click "Save" to confirm the settings.

Reboot the device.


7.0 Telnet and Serial Commands (Port 6324)

HSM-88-4K offers excellent control features where the user can set and access
information from the unit such as IP configuration, factory default, reboot, LED
control, Relay, key press type, macros, device add/delete, etc.
Invalid Commands returns a response as "Invalid Command".
Baud rate：115200
Data Width: 8- bit
Parity: None
Stop: 1-bit

Commands are in ASCII format.

Each command has to be terminated by <CR> and response by <CR>
and <LF>.

Commands are not case sensitive.

Unknown command responds with "Command Failed".
4K 8X8 HDMI Matrix Switcher
© Copyright 2017 Hall Research, Inc.
15