12. BIN CONTROL SWITCH ASSEMBLY
1) Unplug the ice dispenser.
2) Remove the top panel.
3) Remove the storage bin cover.
4) Remove the bin control switch.
5) Remove the snap pin and E-ring, and disassemble the balance plate (B) and shaft.
6) Install the new bin control switch assembly.
7) Assemble the removed parts in the reverse order of which they ware removed.
8) Plug in the ice dispenser, and check that the bin control switch works normally.
DCM-60KE(-P)
Bin Control Switch
Shaft
Storage Bin Cover
Balance Plate (B)
Tie
DCM-120KE(-P)
62
Bin Control Switch
Shaft
Storage Bin Cover
Balance Plate (B)
Tie