4. ELECTRIC CIRCUIT
Reassemble all the components as they were after servicing the unit according to a
service call.
[a] BASIC OPERATION
The ice dispenser starts water supply when the operation switch and ice making switch are
moved to the "ON" position. On completion of water supply, the gear motor starts
immediately. After 5 minutes the compressor starts to begin icemaking operation.
In normal operation, the ice dispenser shuts down when the storage bin fills up to trip the bin
control switch or the ice making switch is moved to the "OFF" position.
Operation switch "ON"
Ice making swtch "ON"
Water supply starts
Water supply ends
Gear monor starts
After 5 min
Compressor starts
(Freeze cycle starts)
Bin full
CAUTION
Water supply ends
Water supply starts
Less than 3 hrs
after bin full
Low ice bin level
Gear motor stops
Compressor stops
Drain
3 hrs or more
after bin full
* Low ice bin level
DCM-60KE: 400g less ice than bin full
DCM-120KE: 800g less ice than bin full
(Microprocessor calculates amount of ice
melt and dispensed)
After 1 min
32