Operation Board; [A] Displaying Compressor Operating Hours; [B] Displaying Cycle Time - Hoshizaki DCM-60KE Service Manual

5. OPERATION BOARD

[a] DISPLAYING COMPRESSOR OPERATING HOURS

1) Press and hold the lock switch.
2) After 3 seconds, the display shows the compressor operating hours.
Note: The display shows the compressor operating hours in six digits divided into three
parts (two digits for 2 seconds each time).
Then, "- -" appears in the display (to show the end of the compressor operating hours
display mode).
e.g. 3527 hours = "00", "35", "27", "- -"

[b] DISPLAYING CYCLE TIME

1) Press and hold the lock switch.
2) After 3 seconds, the display shows the compressor operating hours.
3) While still holding down the lock switch, press the drain switch once.
4) The display shows the cycle time.
Note: The display shows the cycle time in four digits divided into two parts (first minutes
then seconds, for 2 seconds each time) from the latest record (5 records at
maximum).
Then, "- -" appears in the display (to show the end of the cycle time display mode).
If no cycle time is recorded, the display shows "- -" only.
Minutes are indicated as follows:
o 0 to 9 = 0 to 9 minutes
A 0 to 9 = 10 to 19 minutes
b 0 to 9 = 20 to 29 minutes
C 0 to 9 = 30 to 39 minutes
d 0 to 9 = 40 to 49 minutes
E 0 to 9 = 50 to 59 minutes
Seconds are indicated as 0 to 5 0 to 9.
e.g. o9 48 = 9 minutes 48 seconds b7 36 = 27 minutes 36 seconds
34