11. CONTROLLER BOARD
A single type controller board is supplied as a service board. Some modifications and
adjustment will be required to fit the ice dispenser models. Do not repair any parts and
electronic devices on the controller board in the field. Replace the whole board with a
new service board.
[a] MODIFICATION
1) Check that the service board package includes:
Controller board
2) Modify the service board referring to the instruction sheet attached (Set the model number
according to "III. 5. [d] SETTING MODEL NUMBER").
[b] REPLACEMENT
1) Unplug the ice dispenser.
2) Remove the panels.
3) Remove the control box.
4) Disconnect the connectors and board support from the controller board.
5) Remove the controller board from the control box.
6) Install the new controller board and reassemble the control box in the reverse order of the
removal procedure.
7) Replace the panels in their correct position.
8) Plug in the ice dispenser.
IMPORTANT
1 pc.
Instruction sheet
61
1 pc.