Removal And Replacement Of Bin Control Switch Assembly - Hoshizaki DCM-270BAH Service Manual

10. REMOVAL AND REPLACEMENT OF BIN CONTROL SWITCH ASSEMBLY

1) Turn off the power supply and unplug the dispenser.
2) Remove the Top Panel.
3) Remove the Bin Control Switch from the Storage Bin Cover. (Twist, then pull up.)
4) Cut the wire leads and remove switch.
5) Assemble the replacement switch, reversing the procedure used to remove the old
switch.
8) Plug in the dispenser, turn on the power supply and check that the Bin Control Switch
works normally.
35