Fan Motor; Evaporator Assembly - Hoshizaki DCM-60KE Service Manual

7. FAN MOTOR

1) Unplug the ice dispenser.
2) Remove the cabinet.
3) Disconnect the lead wires at their connection.
4) Take out the fan motor with its bracket from the unit.
Remove 4 screws.
5) Remove the fan motor from the fan motor bracket.
6) Assemble the removed parts in the reverse order of which they were removed.

8. EVAPORATOR ASSEMBLY

See the exploded view under "III. 3. ICEMAKING MECHANISM".
1) Move the ice making switch to the "OFF" position.
2) Press the push lever or dispense switch to dispense ice, and remove all ice from the
storage bin.
3) Press the drain switch on the control panel. The display illuminates "DRAIN" during the 1
minute drain cycle.
4) Unplug the ice dispenser.
5) Remove the panels.
6) Remove the storage bin assembly (See "13. STORAGE BIN ASSEMBLY").
EXTRUDING HEAD
7) Remove the sealing bolts, and lift off the extruding head.
8) Check the bearing inside the extruding head. If it is worn out or scratched, replace the
bearing.
Remove fan motor from unit.
57