Power Connector - HP Pavilion 17 Maintenance And Service Manual

2. Use a thin, non-conductive tool to remove the RTC battery (1) from the socket on the system
board.
Reverse this procedure to install the RTC battery on computer models. When installing the RTC
battery, make sure the "+" sign faces up.

Power connector

Description
For use with HP Pavilion 15 Notebook PC computer models
For use with HP Pavilion 17 Notebook PC computer models
Before removing the power connector cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the optical drive.
6. Remove the top cover from the base enclosure (see
7. Remove the WLAN module (see
8. Remove the system board (see
Remove the power connector cable:
NOTE: The power connector cover was removed during the system board removal.
106 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 65),
WLAN module on page
System board on page
Spare part number
762507-001
763699-001
Base enclosure on page
86).
95).
70).