HP Pavilion 17 Maintenance And Service Manual page 97

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the optical drive.
6. Remove the base enclosure and top cover (see
Remove the WLAN module:
1. Disconnect the #1 and #2 WLAN antenna cables from the WLAN module (1) if you have not
already done so to remove the display panel..
NOTE: The WLAN module may have two screws depending on the model.
NOTE: The #1 WLAN antenna cable is connected to the WLAN module #1 main terminal. The
#2 WLAN antenna cable is connected to the WLAN module #2 auxiliary terminal.
2. Remove the Phillips PM screw(s) (2) that secure the WLAN module to the system board. (The
WLAN module tilts up.)
Battery on page 65).
Base enclosure on page
Component replacement procedures
70).
87