Burley Trailer User Manual page 9

Tongue
Receptacle
4. Anchor Lock Pin
with Hairpin Cotter
2. Rotate Tongue
into Place
1. Slide the tongue onto the pivot pin at the left front.
2. Remove the hairpin cotter and lock pin from the front tongue recep-
tacle, rotate the tongue up into place, and snap it into the two plastic
tongue receptacles.
3. Secure the tongue by pushing the lock pin fully into the front tongue
receptacle.
4. Rotate the lock pin and locate the hole in it which will be between the
receptacle and the trailer frame. Anchor the lock pin by inserting the
hairpin cotter all the way into the hole in the lock pin.
Never operate trailer without tongue lock pin and hairpin cotter locked in
place. Unlocked tongue can loosen or detach and cause accident resulting
in serious injury.
1. Slide Tongue onto
Pivot Pin
3. Secure Tongue
with Lock Pin
Lock pin & hairpin cotter
locked in place (viewed
from underside).
9