Advertisement
3. Getting Started
The F-Cue Board ships with a default configuration for use. Please check following Switch.
Switch name
BOOT SEL[4:1]
You can change the boot device for U-Boot by setting SW<BOOT SEL>.
Boot device
eMMC
micro SD card
Follow these steps to boot Linux on F-Cue Board.
Connect the HDMI cable between the monitor and F-Cue Board.
Connect the mouse and the keyboard to F-Cue Board..
Plug the supplied adapter into the DC-jack and a wall outlet.
Turn on the Power supply button.
6/9
Default configuration
4:OFF, 3:OFF, 2:ON, 1:ON
4
3
2
OFF
OFF
ON
OFF
ON
ON
Power supply button
[eMMC card boot]
1
Note
ON
Default setting
ON
-
BOOT SEL
O
F
F
©2017 FUJITSU ELECTRONICS INC.
Quick Start Guide
1
2
3
4
Advertisement
