Beeper Definitions - Motorola Symbol LS9208 Product Reference Manual

To scan a bar code, present it to the exit window of the scanner or move it from side-to-side in a sweeping motion.
Presentation scanning
Figure 2-7
Swipe scanning
Figure 2-8
NOTE To mount the optional hands-free adjustable stand, see

Beeper Definitions

The scanner emits different beeper sequences and patterns to communicate with the user.
sequences that occur during both normal scanning and while programming the scanner.
Standard Beeper Definitions
Table 2-1
Beeper Sequence
Standard Use
3 short high beeps
Short high beep
4 long low beeps
5 low beeps
Mounting Template on page
Power up.
A bar code symbol was decoded (if decode beeper is enabled).
A transmission error was detected in a scanned symbol. The data is
ignored. This occurs if a unit is not properly configured. Check option
setting.
Conversion or format error.
Scanning
2-11.
Table 2-1
Indication
2 - 5
defines beep