Low Power Blink - Motorola Symbol LS9208 Product Reference Manual

4 - 8 Symbol LS9208 Product Reference Guide

Low Power Blink

After a period of inactivity, the scanner enters a reduced power mode. This parameter controls how aggressively
power is conserved, and therefore determines the method of waking the scanner up.
If you select Low Power - Blink Mode, the scanner (after a period of inactivity) blinks infrequently to save power.
To restore the scanner to full power mode, use the scanner by presenting a bar code.
If you select Motor and Laser Shut Down, the scanner (after a period of inactivity) turns off the motor and laser,
but leaves the green Power LED lit. Depress the trigger to awaken the scanner to its full power mode.
*
Low Power - Blink Mode
Low Power - Shut Down