13 - 6
Symbol LS9208 Product Reference Guide
Special Commands
Pause Duration
This parameter inserts a pause in the data transmission. To set the pause, scan a two-digit number (i.e., two bar
codes) representing a 0.1 second interval. For example, using the numeric bar codes in
Codes,
scan bar codes 0 and 1 to insert a 0.1 second pause; or scan 5 and 0 for a 5 second pause. To correct an
error or to change your selection, scan the
The default for Pause Duration is 1 second.
Begin New Rule
Scan this bar code to start entering a new rule.
Save Rule
Scan this bar code to save the rule.
Cancel bar code on page
D-4.
Pause Duration
Begin New Rule
Save Rule
Appendix D, Numeric Bar