Discrete 2 Of 5 (Dtf); Enable/Disable Discrete 2 Of 5; Set Lengths For Discrete 2 Of 5 - Motorola Symbol LS9208 Product Reference Manual

11 - 46 Symbol LS9208 Product Reference Guide

Discrete 2 of 5 (DTF)

Enable/Disable Discrete 2 of 5

To enable or disable Discrete 2 of 5, scan the appropriate bar code below.

Set Lengths for Discrete 2 of 5

The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)
the code contains. Set lengths for D 2 of 5 to any length, one or two discrete lengths, or lengths within a specific
range.
NOTE When setting lengths for different bar code types, include a leading zero for single digit numbers.
One Discrete Length - Select this option to decode only D 2 of 5 symbols containing a selected length. Select the
length using the numeric bar codes in
symbols with 14 characters, scan D 2 of 5 - One Discrete Length, then scan 1 followed by 4. To correct an error
or to change your selection, scan Cancel on
Enable Discrete 2 of 5
*
Disable Discrete 2 of 5
Appendix D, Numeric Bar
page D-4.
D 2 of 5 - One Discrete Length
Codes. For example, to decode only D 2 of 5