CITROEN C5 Handbook page 88

C5 - All Types
CHECKING AND SETTING THE VALVE TIMING
Engine : 4HX
Setting the valve timing (continued)
- Remove the tool [1].
- Refit the tool [1].
- Tension value should be :
51 ± 3 SEEM units.
IMPERATIVE : If value is incorrect, restart the operation.
- Remove tools [1], [2] and [5].
- Rotate the crankshaft 2 times (normal direction of rotation).
- Fit the tool [3].
IMPERATIVE : Should it be impossible to peg the camshaft, check that the
offset between the camshaft pinion hole and the pegging hole is not more
than 1 mm. In the case of an incorrect value, recommence the operation.
- Remove the tool [2].
- Complete the refitting of components.
B1EP15ED
85