C5 - All Types
CHECKING AND SETTING THE VALVE TIMING
Engine : XFX
Setting the valve timing
- Remove the components as necessary for the operation.
- Remove the screws (19) and the plate (20).
- Peg the crankshaft, using tool [2].
NOTE : Damp the rotation of the camshafts (15) and (17), using tool [6].
- Untighten the camshaft pulley screws (15) and (17).
NOTE : Damp the rotation of the camshafts (14) and (18), using tool [5].
- Untighten the camshaft pulley screws (14) and (18).
NOTE : Lubricate the tools [1], with grease G6 (TOTAL MULTIS).
Peg the camshafts, using tools [1], [5] and [6].
Remove the screw (21) of the panel (25).
Untighten the nut (23) of the tensioner roller (24).
Untighten the screws (22) of the panel (25).
Remove the guide roller (16).
WARNING : mark the direction of fitting of the timing belt, in case the belt is to be reused
- Remove the timing belt.
B1EP15VD
71