SYNERGIE
AUXILIARY EQUIPMENT DRIVE BELT
Engines : RHY - RHS - RHZ
[1] Belt tension adjusting square
[2] Ø 4 mm peg
[3] Ø 2 mm peg
[4] Dynamic tensioner compression lever
Remove
Re-use of belt
WARNING : Mark the direction the belt was fitted in case of re-use of the same belt.
- Compress the tensioner roller (2) by action at « a » (in anti-clockwise direction), tool [4].
- Keep the tensioner roller (2) compressed and remove the belt.
No re-use of belt.
- Compress the dynamic tensioner roller (2) by action at « a » (anti-clockwise), using tool [4].
- Peg using tool [2], at « b ».
- Hold the dynamic tensioner roller (2) compressed and remove the belt.
- Loosen the screw (1).
58
Without air conditioning
Tools
: (-).0188 J2
: (-).0188.Q1
: (-).0188.Q2
: (-).0188.Z
B1BP1YKD