CITROEN C5 Handbook page 202

B3FP10UC
BRAKES (continued)
Checks and hydraulic adjustment of the compensator
- Use the brake pressure checking equipment 4104-T, connect diagonally and bleed:
Ø bleed screw : Caliper 8x125 - Wheel cylinder 7x100.
- Set the vehicle at setting height.
- Pressure chart :
Engine : 2 0 HDi
Disc
Front
40
65
135
- If the pressures are not correct, adjust as follows :
- Refit the nut (1).
- Adjust using the nut (2) to obtain the braking pressure.
- Tighten the lock nut (3).
- Hold the threaded rod (4).
- Tighten the flanged nut (1) over the nut (2).
199
Engine : 2.0i 16V
Drum Disc
Rear Rear
Front
40 50
65 85
135 100
86
SYNERGIE
50
85