CHECKS AND ADJUSTMENTS : BE4/5 GEARBOX CONTROLS
[1] Tool for positioning the gear lever
WARNING : Cables should be adjusted each time
the gearbox, gear controls or power unit are removed.
Inside the vehicle.
- Remove the trim under the gear lever.
- Lock the gear lever in neutral position,
using tool [1].
Under the bonnet.
- Remove the air filter assembly.
- Unlock the ball-joint keys at «a».
- Place the gear selection and control levers neutral.
- Lock the cable lengths with the ball-joint locking
keys.
Engines : RFN
Adjusting the gear controls.
TOOLS :
ADJUSTMENTS.
139
: 9607-T.
CHECKS.
- Remove the tool [1].
- Check that all the gears engage without
«tightness ».
- Check that the gear lever moves identically
forwards and backwards and to right and left. If it
does not, repeat the adjustment.
- Refit the trim under the gear lever.
- Refit the air filter assembly.
B2CP3C6C
SYNERGIE
B2CP3C0C