Disassembly Procedures - Epson Stylus CX7300 Service Manual

EPSON Stylus CX7300/CX7400/DX7400/NX200/TX200 series/SX200 series/Stylus CX8300/CX8400/DX8400/NX400/TX400 series/SX400 series Revision C

4.2 Disassembly Procedures

For disassembling each unit, refer to the pages in the following flowchart.
Start
" 4.3.3 Document Cover/ASF Cover " (p97)
" 4.3.4 Scanner Unit/Hinge " (p98)
" 4.4.2 Panel Unit/LCD Unit " (p103)
" 4.3.5 Upper Housing/Card Slot Cover " (p100)
" 4.5.4 Removing the Printer Mechanism
(Lower Housing) " (p111)
" 4.4.1 Main Board Unit " (p101)
" 4.5.5 Left Frame " (p113)
" 4.5.6 Front Frame/Right Frame " (p114)
" 4.5.12 CR Motor " (p120)
" 4.5.2 CR Scale " (p109)
" 4.5.3 Hopper " (p110)
" 4.5.13 Main Frame Assy " (p122)
" 4.5.16 ASF Unit " (p126)
" 4.5.17 Ink System Unit " (p128)
" 4.5.7 Star Wheel Holder Assy " (p116)
" 4.5.8 EJ Roller " (p116)
DISASSEMBLY/ASSEMBLY
" 4.3.1 Paper Support Assy " (p96)
" 4.7.1 Panel Unit (CX7300/TX200 series) "
(p139)
" 4.5.1 Printhead " (p107)
" 4.4.3 Power Supply Unit " (p105)
" 4.5.7 Star Wheel Holder Assy " (p116)
" 4.5.8 EJ Roller " (p116)
" 4.5.14 CR Unit " (p124)
" 4.5.18 Front Paper Guide " (p131)
" 4.5.9 PF Encoder Sensor " (p117)
" 4.5.10 PF Scale " (p118)
" 4.5.10 PF Scale " (p118)
Figure 4-1. Disassembling Flowchart
Disassembly Procedures
" 4.3.2 Stacker Assy " (p96) " 4.4.2 Panel Unit/LCD Unit " (p103)
" 4.6.1 Upper/Front Scanner Housing "
(p134)
" 4.6.2 Scanner Carriage Unit " (p135)
" 4.5.2 CR Scale " (p109) " 4.5.7 Star Wheel Holder Assy " (p116)
" 4.5.3 Hopper " (p110)
" 4.5.9 PF Encoder Sensor " (p117)
" 4.5.10 PF Scale " (p118)
" 4.5.11 PF Motor " (p119)
" 4.5.15 Upper Paper Guide " (p126)
" 4.5.19 PF Roller " (p132)
You need to remove the parts/units shown in dashed line box if they exist on
C H E C K
the way to the target part/unit.
P O I N T
You need to remove the parts/units indicated with
assembling CX7300/TX200 series.
" 4.7.1 Panel Unit (CX7300/TX200 series) "
" 4.6.3 Scanner Motor Unit " (p138)
" 4.5.20 Waste Ink Pads " (p133)
(p139)
for disassembling/
95
Confidential