Epson Stylus CX7300 Service Manual page 62

EPSON Stylus CX7300/CX7400/DX7400/NX200/TX200 series/SX200 series/Stylus CX8300/CX8400/DX8400/NX400/TX400 series/SX400 series Revision C
CX8300/TX400 series
Error Name
LCD Message
Fatal error A scanner error has occurred. See your
(scanner) documentation
A printer error has occurred. Turn off the
Fatal error
printer, then press On button to turn on.
(printer mechanism)
See your documentation.
Maintenance error
Waste ink pad in the printer is saturated.
(waste ink
Contact your dealer to replace it.
overflow)
Paper jam. Open the scanner unit and
remove the paper.
Paper jam error Press the Start button to eject the paper
inside.
See your documentation.
CSIC Error
Cannot recognize ink cartridges. Make
sure ink cartridges are installed correctly.
Incorrect I/C
Ink cartridge cover is open.
Ink cartridge cover
Open the scanner unit and close the ink
open error
cartridge cover.
Replace Ink Press the OK button to replace the
Cartridge cartridges.
Paper out.
Paper out error
Load paper and press the Start button.
TROUBLESHOOTING
Table 3-4. Error Indications and Fault Occurrence Causes
CX7300/TX200 series
LED Indications
Power Error Ink Paper 1/2
Blink 3
Blink 3 Blink 3 Blink 3 (selected
side LED)
Blink 1
Blink 1 Blink 1 Blink 1 (selected
side LED)
Blink 1
Blink 1 ON ON (selected
side LED)
-- Blink 1 OFF
-- OFF ON
-- ON OFF
Error Indications and Fault Occurrence Causes
STM3 Message
-
Delete all print jobs and turn the printer off.
Remove any foreign objects from inside the
printer. After a few minutes, turn the
printer back on.
Parts inside your printer are near the end of
their service life. See your printer
documentation.
Click the How to button for instructions on
--
removing jammed paper.
*1
Black: XXXX
Color: XXXX *1
............
-- Epson recommends the genuine Epson
cartridges listed above. Click the How to
button for ink cartridge installation
instructions.
Reload the paper, then press the Start
button on the printer or click the Continue
-- button if it appears on the screen.
To cancel all print jobs, click the Cancel
button.
Error Cause Reference
RAM trouble occurs.
System trouble occurs.
Table 3-5.
(p65)
Mechanical trouble occurs.
Table 3-6.
The waste ink counter
(p71)
exceeds to capacity.
Table 3-7.
Paper stays in the paper path
(p71)
after paper ejection.
Ink is out in some I/C or no
Table 3-8.
I/C is set or incorrect I/C is
(p74)
set.
Table 3-9.
Failure to load paper to print.
(p75)
62
Confidential