Epson Stylus CX7300 Service Manual page 104

EPSON Stylus CX7300/CX7400/DX7400/NX200/TX200 series/SX200 series/Stylus CX8300/CX8400/DX8400/NX400/TX400 series/SX400 series Revision C
Be sure to disconnect the Panel FFC from the connector on the
C H E C K
Panel Board.
P O I N T
5. Disconnect the Panel FFC from the connector (CN1) of the Panel Board, and
remove the Panel Unit together with the LCD Unit.
LCD Unit
Figure 4-21. Removing the Panel Unit and LCD Unit (2)
6. Disconnect the LCD FFC from the connector (CN2) of the Panel Unit.
7. Release the dowels (x2) that secure the LCD Unit, and separate the LCD Unit
from the Panel Unit.
LCD FFC
LCD Unit
Figure 4-22. Removing the Panel Unit and LCD Unit (3)
DISASSEMBLY/ASSEMBLY
Panel Unit
CN1
Panel Unit
CN2
Dowel
Removing the Circuit Boards
8. Remove the screws (x3) that secure the Panel Board and Panel Board Frame,
and remove the Panel Board together with the Panel Board Frame.
Panel Board Frame
1
Panel Board
Figure 4-23. Removing the Panel Board
2
3
C.B.P. 3x8, F/Zn-3C (3±1kgfcm)
Positioning Hole/Pin
Confidential
104