Epson Stylus CX7300 Service Manual page 64

EPSON Stylus CX7300/CX7400/DX7400/NX200/TX200 series/SX200 series/Stylus CX8300/CX8400/DX8400/NX400/TX400 series/SX400 series Revision C
CX8300/TX400 series
Error Name
LCD Message
Head cleaning Replace ink cartridge before cleaning
(Ink low error) Printhead.
Pre-scanning error
No photos could be recognized. Make sure
(photo)
the photos are positioned correctly.
(CX8300/TX400
For details, see your manual.
series only)
Communication
error
Note *1 : The "XXXX" represents the part number of the Ink Cartridge.
TROUBLESHOOTING
Table 3-4. Error Indications and Fault Occurrence Causes
CX7300/TX200 series
LED Indications
Power Error
-- --
-- -- --
Error Indications and Fault Occurrence Causes
STM3 Message
Ink Paper 1/2
Black: XXXX *1
*1
Color: XXXX
......
Blink 1
You may continue printing, or click the
How to button to change the ink cartridge
now.
-- --
Check all connections and make sure all
devices are on. If the power was turned off
-- -- during printing, cancel the print job. If the
error does not clear, see your printer
documentation.
Error Cause
Head cleaning was attempted
in the Ink low status.
-- Photos cannot be recognized.
The printer cannot
communicate with the PC
properly.
Reference
Table
3-10.
(p77)
Table
3-16.
(p79)
Table
3-18.
(p80)
64
Confidential