Epson Stylus CX7300 Service Manual page 129

EPSON Stylus CX7300/CX7400/DX7400/NX200/TX200 series/SX200 series/Stylus CX8300/CX8400/DX8400/NX400/TX400 series/SX400 series Revision C
If the Carriage lock lever comes off, reassemble it following
the steps below.
1. Attach the one end of the Extension Spring 0.8 to the
hook of the Carriage Lock Lever.
2. Attach the other end of the Extension Spring 0.8 to the
Ink System Unit.
3. Insert the dowel (x1) of the Carriage Lock Lever into the
hole (x1) of the Ink System Unit.
Ink System Unit
Figure 4-90. Installing the Carriage Lock Lever
DISASSEMBLY/ASSEMBLY
Carriage Lock Lever
Extension Spring 0.8
Dowel and Hole
Disassembling the Printer Mechanism
When installing the Ink System Unit, pay attention to the
following instructions.
• Align the dowels (x3) of the Ink System Unit with the
positioning holes (x3) of the Base Frame.
Base Frame Side
2
1
Ink System Side
3
Figure 4-91. Installing the Ink System Unit (1)
• Align the ribs (x2) of the Ink System Unit with the grooves
(x2) of the Base Frame.
Ink System Unit
Figure 4-92. Installing the Ink System Unit (2)
3
2
1
Rib and Groove
129
Confidential