Epson Stylus CX7300 Service Manual page 115

EPSON Stylus CX7300/CX7400/DX7400/NX200/TX200 series/SX200 series/Stylus CX8300/CX8400/DX8400/NX400/TX400 series/SX400 series Revision C
4. Remove the screw (x1) that secures the Front Frame and the Right Frame
together.
5. Release the dowel (x1) and the hook (x1) that secure the Right Frame, and
remove the Right Frame.
Hook
dowel
Figure 4-49. Removing the Front Frame/Right Frame (2)
6. Release the hook (x1), and remove the Front Frame.
Cutout
Figure 4-50. Removing the Front Frame/Right Frame (3)
DISASSEMBLY/ASSEMBLY
Right Frame
C.B.P. 3x6, F/Zn-3C (6±1kgfcm)
Hook Front Frame
Disassembling the Printer Mechanism
After replacing the Front Frame, be sure to attach an acetate
tape referring to the figure below.
10mm
18mm
Figure 4-51. Acetate Tape Position
When installing the Front Frame, pay attention to the
following instructions.
• As shown in Figure 4-50, be sure to secure the Front Frame
with the hook (x1) and the cutouts (x2).
• As shown in Figure 4-49secure the Front Frame and Right
Frame together with the screw. (Place the Right Frame on
top of the Front Frame.)
Secure the Head FFCs (x3) to the Front Frame with the
acetate tape (x1) as shown in the figure below.
Acetate Tape (40mm)
Align the edge of the Front
Frame with the bending
point of the Head FFC, and
secure the FFC with the
acetate tape.
Figure 4-52. Acetate Tape Position
Bending Point of Head FFC
115
Confidential