Table of Contents
Advertisement
INPUT menu
From the INPUT menu, items shown in the table below
can be performed.
Select an item using the ▲/▼ cursor buttons, and press
the ► cursor button or ENTER button to execute the item.
Then perform it according to the following table.
Item
PROGRESSIVE
VIDEO NR
COLOR SPACE
COMPONENT
(continued on next page)
Using the ▲/▼ buttons switches the progress mode.
TV
FILM
TURN OFF
• This function is performed only for an interlaced signal at the
VIDEO or S-VIDEO input, and for 480i@60 or 576i@50 signal at
the COMPONENT VIDEO input.
• When TV or FILM is selected, the screen image will be sharp.
FILM adapts to the 2-3 Pull-Down conversion system. But these
may cause a certain defect (for example, jagged line) of the picture
for a quick moving object. In such a case, please select TURN OFF,
even though the screen image may lose the sharpness.
Using the ▲/▼ buttons switches the noise reduction mode.
HIGH
MID
• This function is performed only for the VIDEO or S-VIDEO input,
and for 480i@60 or 576i@50 signal at the COMPONENT VIDEO
input.
• When this function is excessive, it may cause a certain
degradation of the picture.
Using the ▲/▼ buttons switches the mode for color space.
AUTO
RGB
• This item can be selected only for a computer signal or component
video signal except SCART RGB signal.
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well at some signals. In such a
case, it might be good to select a suitable mode except AUTO.
Using the ▲/▼ buttons switches the function of the COMPONENT
(Y, C
/P
, C
/P
) port.
B
B
R
R
COMPONENT
When the SCART RGB is selected, COMPONENT (Y, C
P
) and VIDEO ports will function as a SCART RGB port. A SCART
R
cable is required for a SCART RGB input to the projector. For your
reference, see the TECHNICAL part.
Description
LOW
SMPTE240
REC709
SCART RGB
INPUT menu
REC601
/P
, C
B
B
R
33
/
Advertisement
Table of Contents
