Easy Menu; Easy Menu Functions; Aspect - Hitachi PJ-TX300E User Manual

5.
To operate the selected item
Use the ◄/► cursor buttons to operate the item. For details please see the
following descriptions.
6.
To reset the operation
Press the RESET button while the item is selected.
(Does not reset the LANGUAGE item.)
7.
To close the menu
Press the MENU button to close the menu. The menu will automatically close
after several seconds without user input.

EASY MENU functions

The following functions are accessible via the EASY MENU. After selecting
an item according to the procedure described in the preceding "EASY MENU
operation" section, refer to the following table for details on operating the selected
item.
Item

ASPECT

(Continued on next page)
Using the ◄/► cursor buttons changes the aspect ratio.
 For a computer (RGB) signal
NORMAL  4:3  16:9
 For an HDMI signal
NORMAL  4:3  16:9  WIDE  MOVIE1  MOVIE2 14:9
 For a video, s-video or component video signal
4:3  16:9  WIDE  MOVIE1  MOVIE2  14:9
 For no signal or an unrecognized signal
16:9 (fixed)
4:3
Example for
a 16:9 signal
Example for 4:3
NORMAL
a 4:3 signal
- NOTE -
• The NORMAL mode uses the signal's original aspect ratio.
• Performing an automatic adjustment initializes the aspect ratio
setting.
• The ASPECT function can also be accessed using the ASPECT
button on the remote control (24) or via the IMAGE menu in the
Advanced Menu (43).
Description
16:9 WIDE MOVIE1
16:9
NORMAL

EASY MENU

MOVIE2 14:9
31