Changing The Light - Waeco CoolFreeze CDF-35 Instruction Manual

CoolFreeze
Defrosting
Air humidity can deposit on the evaporator or in the interior of the cooling device
as frost so that the refrigerating performaance is reduced. During removal of the
ice never use hard or sharp tools which can cause damage to the plastics or the
evaporator.
Therefore defrost the cooling device in good time. Take out the refrigerated
products and store them in another cooling device so that they remain
refrigerated. Set the switch button on "0" and leave the lid open. Wipe up the
condensed water.

Changing the light

In case your coolbox is equipped with an interior light, this electric light bulb may
be exchanged.
Grab the lamp at the switch pin and press this pin forwards, so that the
transparent part of the lamp separates from the housing. Now you can exchange
the electric light bulb and put the lamp back into the housing.
Tips for energy saving
• Mount the refrigerator in a cool dry place away from direct sunlight.
• Always allow food to cool before storing in the refrigerator.
• Defrost your refrigerator periodically or when the evaporator is covered with
a thick layer of ice.
• Do not set the thermostat colder than the required temperature.
• Do not leave the lid or the door open any longer than necessary!
• Always ensure that the compressor and condensor are in a well ventilated
area.
6