EURO AirPRO 238 Installation Manual And User's Manual
Hide thumbs Also See for AirPRO 238:

Advertisement

Installation Guide
and Users Manual
AirPRO 238 Professional Series
(PSF/L/Z)
IMPORTANT:
Read and save these instructions.
NOTICE:
Installer: Leave this guide with the homeowner
Homeowner: Keep this guide for future reference
Wall Mount Range Hood
Rev. 3046u.1b

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AirPRO 238 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for EURO AirPRO 238

  • Page 1 Installation Guide and Users Manual AirPRO 238 Professional Series (PSF/L/Z) IMPORTANT: Read and save these instructions. NOTICE: Installer: Leave this guide with the homeowner Homeowner: Keep this guide for future reference Wall Mount Range Hood Rev. 3046u.1b...
  • Page 3: Important Safety Notice

    Important Safety Notice Read all Instructions before Installing and operating this appliance • The installation in this manual is intended for qualified installers, service technicians or persons with similar qualified background. Installation and electrical wiring must be done by qualified profession- als and in accordance with all applicable codes and standards, including fire-rated construction.
  • Page 4 Important Safety Notice Read all Instructions before Installing and operating this appliance • Clean ventilating fan frequently. • Always use appropriate cookware and utensils size. • Always use cookware appropriate for the size of the surface element. To reduce the risk of injury to persons in the event of a stove top grease fire: •...
  • Page 5: Table Of Contents

    Table of Contents INSTALLATION USE AND CARE Tools needed............3 Troubleshooting...........18 Parts supplied...........4 Use and care information.......19 Venting requirements........5 Specifications..........19 Mount heights & clearance......5-6 MAINTENANCE Calculating vent system length.......6 Cleaning..........20 Venting methods & ductless conversion..7 Replacing filter & light bulb......20 Charcoal filters & electrical requirements..8 WARRANTY Preparation............9 Coverage &...
  • Page 6: Parts Supplied

    Parts supplied: Range Hood (vary with model) Flappers Chimney Mounting Bracket Lower standard chimney Upper standard chimney Stainless Steel Baffle Filter(s) Grease Tunnel Grease Tunnel Charcoal Filter Air diverter (Optional re-circulating kit) (Optional re-circulating kit) Description Quantity Toggle Bolts 2 Pcs Duct Set 1 Set Body Hook...
  • Page 7: Venting Requirements

    Venting Requirements Height & Clearance • Vent system must terminate to the outside Mounting (roof or side wall). Maximum* ceil- Bracket ing clearance • DO NOT terminate the vent system in an at- Standard 110” at 31” hood tic or other enclosed area. Upper mounting height •...
  • Page 8: Calculating Vent System Length

    IMPORTANT: • A minimum of 6” round (standard for this range hood) or 3-1/4 x 10” rectangular duct (purchased separately) must be used to maintain maximum airflow efficiency. • Always use rigid type metal/aluminum ducts if available to maximize airflow when connecting to provided duct.
  • Page 9: Venting Methods & Ductless Conversion

    Venting Methods • This range hood is factory set for venting through the roof or wall. For non-vented (re-circulating) installa- tions, see Ductless Conversion on Page 7. • Vent work can terminate either through the roof or wall. To vent through a wall, a 90° elbow is needed. IMPORTANT: •...
  • Page 10: Charcoal Filters & Electrical Requirements

    Charcoal Filter Installation NOTE: The charcoal filters are preinstalled if you purchased the range hood with re-circulating kit from us. Remove stainless steel baffle filters on hood. Remove the safety filter under the stainless steel baffle filters by unscrewing two screws, then position the charcoal filter and align the screw holes, reinstall and fasten two screws.
  • Page 11: Preparation

    Preparation WARNING Excessive Weight Require three or more person to move and install this range hood. Spinal or other bodi- ly injuries could occur if it is not followed. Advanced Preparations: Read the entire installation guide and users manual thoroughly, understand instructions and warnings. Be familiar with the controls of the range hood by reading through Range Hood Operations, Page 12.
  • Page 12: Installation

    Installation WARNING Installations (refer to Page 4 for parts): Measure the distance between stove top and the bottom of Excessive Weight range hood. A distance of 28” to 31” is recommended*. Require three or more person to move and *Due to different ceiling height configurations, recom- install this range hood.
  • Page 13: Level

    Installation (Continued) Connect the range hood to a designated standard outlet (please refer the product label for the suitable voltage of this unit) or cut off the plug and connect three wires (black, white and green) to house wires and cap with wire connectors. Connect according to colors (i.e.
  • Page 14: Range Hood Operations

    Range Hood Operations Power Light Power-Off Delay Increase Value Decrease Value Power-Off Delay Digital Timer Blower Speed Indicator Cleaning Reminder Indicator The range hood is designed to remove smoke, cooking vapors and odors from the cook top area. For best results, start the range hood before cooking and allow it to operate several minutes after the cooking is completed to clear all smoke and odors from the kitchen.
  • Page 15: Level

    Range Hood Operations (Continued) Power Light Power-Off Delay Increase Value Decrease Value Power-Off Delay Digital Timer Blower Speed Indicator Cleaning Reminder Indicator • Controls: • Adjusting the timer function: • While the blower (motor) is not running, press and hold Decrease Value button over 3 seconds to enter timer mode.
  • Page 16: Wiring Diagram & Measurements

    Wiring Diagrams Wiring Diagram 110V (4 Speed) Wiring Diagram 220V(4 Speed) NOTE: Wiring Diagrams shown above with GU10 light configuration. A transformer is required for MR16 Lights. Page 14...
  • Page 17 Wiring Diagrams (Continued) Wiring Diagram 110V (6 Speed) Wiring Diagram 220V (6 Speed) NOTE: Wiring Diagrams shown above with GU10 light configuration. A transformer is required for MR16 Lights. Page 15...
  • Page 18 Measurements and Diagrams Installation Overview: Mounting Bracket Qty: 6 PCS Qty: 6 PCS (For sheet rock only) Re-circulating kit exhaust (Re-circulating kit not shown) Upper chimney Glass Canopy Screw Qty: 4 PCS (Optional with glass canopy) Duct work and electric wiring region Qty: 4 to 8 PCS Lower chimney...
  • Page 19 Measurements and Diagrams (Continued) • All inch measurements are converted from millimeters, thus inch measurements are estimated. Overall: AP238-PSL AP238-PSF AP238-PSZ Page 17...
  • Page 20: Troubleshooting

    Troubleshooting If the range hood or halogen light does not operate • Check if the range hood has been plugged in, make after installation: sure that all power has been turned back ON, fused not blown and all electrical wiring are properly con- nected.
  • Page 21: Use And Care Information

    Use and Care Information Operations: • Read and understand all instructions and warnings in this manual before operating the appliance. Save these instructions for future reference. • Always leave safety grills and filters in place. Without these components, operating blowers could catch on to hair, fingers and loose clothing.
  • Page 22: Cleaning

    Maintenance SAFETY WARNING: Never put your hand into area housing the fan while the fan is operating! SAFETY WARNING: Never For optimal operation, clean range hood and all baffle/spacer/filter/grease tunnel/oil container regularly. Regular care will help preserve the appearance of the range hood. Cleaning Exterior surfaces: •...
  • Page 23: Coverage & Exceptions

    Warranty must rese sent chas date Pl Plea ease a an h a hase l e les re rece i n invo i in d e der ai ain se serv i c ice d e der warr rran One Year Parts Warranty: For one year from the date of original purchase, your local reseller will provide free of charge, non-consumable replace- ment parts or components that failed due to manufacturing defects.
  • Page 24: Disclaimer & Contact Information

    Disclaimer Carefully inspect all items for damages before accepting delivery. note any damages on the freight bill or express receipt. request name and signature of the carrier’s agent and keep copy to support your claim. Upon acceptance of items, owner assumes responsibility for its safe arrival. Report damages to the carrier and file a claim immediately.
  • Page 25 Your Notes Page 23...
  • Page 26 Your Notes Page 24...
  • Page 27 Your Notes Page 25...
  • Page 28 Euro-Kitchen, Inc. 2341 Industrial Parkway West Hayward, CA 94545 Ph: 510.266.0099 Fax: 510.266.6630 http://www.euro-kitchen.com...

This manual is also suitable for:

Airpro 238 professional series

Table of Contents