Installing The Cabinet Back - Epson PhotoPC 3000Z Service Manual

EPSON PhotoPC 3000Z

4.3.6 Installing the CABINET BACK

1. Install the LENS FPC to the CA2 board.
2. Connect the FPC from the CABINET BACK to the connector CN116 of the
CA2 board and install the CABINET BACK to the CABINET FRONT.
3. Secure the CABINET BACK with 2 screws (1) (1.7x5).
Figure 4-12. Installing the CABINET BACK
Disassembly and Assembly Assembly
Revision A
69