Table of Contents
Advertisement
PhotoPC 3100Z
4.3.6 Installing the CABINET BACK
1.
Install the LENS FPC to the CA2 board.
2.
Connect the FPC from the CABINET BACK to the connector CN116 of the CA2
board and install the CABINET BACK to the CABINET FRONT.
3.
Secure the CABINET BACK with 2 screws (1) (1.7x5).
C H E C K
Be careful not to bite the LCD lead wires (white / pink) near the
P O I N T
tripod screw hole when assembling Cabinet back.
Disassembly and Assembly
Figure 4-14. Installing the CABINET BACK
Assembly
Revision A
76
Advertisement
Table of Contents
Troubleshooting
