Table of Contents
Advertisement
PhotoPC 2100Z
5.1 Overview
This section describes the adjustments required according to service components once
they have been replaced and also describes procedures for such adjustments.
Service Components
1. Firmware
Installation
Flash Tube
Battery Box
Front Cover
Rear Cover
Battery Cap
Lens Assy
PCB Fixing Frame
Monitor Fixing Frame
Monitor Window
Eye-piece Window
Connector Door
Card Door
Eject Button
Main Circuit Board
Release Circuit Board
Flash Circuit Board
8P FFC
Monitor LCD
Power Supply Unit (DC/
DC Unit)
Note:
: Required
Adjustment
Table 5-1. Adjustments Required Once Relevant Components have been Replaced
Sequence in which Adjustments should be Made
3. LCD
2. BC Compensation
Compensation
The table below shows the adjustments required when components have been replaced.
4. CCD Adjustment
5. AF Compensation
Overview
Revision E
6. Strobo adjust
7. USB ID Writing
60
Advertisement
Table of Contents
