Shooting Operation - Epson PhotoPC2100Z Service Manual

PhotoPC 2100Z

1.3.3.2 Shooting Operation

Pressing the shutter button halfway (focus lock)
Evaluates AF/AE/AWB, and reflects the evaluated value in the preview
display. If the CF is pulled out in this status, an alarm is indicated.
Even if the communication cable is inserted, transition to the communication
mode does not take place during half-press of the shutter button.
Transition to communication mode is achieved either after cancellation of
half-press of the shutter button or after shooting.
Shooting process operation
Table 1-6. Shooting Process Operation
User/Camera
LCD
Operation
1 Pressing the OFF
shutter button
fully
2 Image OFF
processing
3 Image ON
confirmation (including
viewfinder
shooting)
Product Description
Contents of Camera Target
Operation Processing Time
-
Shooting based on the
AE, AWB, AF evaluation
data.
Capturing the CCD image
data.
Transferring the image
data to SDRAM.
2 seconds
Processing the image
data.
Starting to charge the
flash when it is to be
used.
-
Displaying the image
confirmation screen
during image processing.
After image processing,
the camera transfers the
image to the CF (back
operation).
Functional Specifications
Table 1-6. Shooting Process Operation (continued)
User/Camera
LCD
Operation
4-1 Pressing the ON
OK button
4-2 Pressing the ON Displaying the simple DPOF
DPOF button screen.
4-3 Next shooting ON
Processing after shooting
After shooting, AE will be executed at the beginning of preview.
Revision B
Contents of Camera Target
Operation Processing Time
-
Starting to display motion
picture (through image).
Transition to each
shooting mode.
Starting to display motion
picture (through image).
Transition to each
shooting mode.
10