Chapter 5 Using The Raw Data Processing Software; Overview; System Requirements - Epson R-D1 User Manual

Chapter 5
Using the RAW Data Processing Software

Overview

When you take photos with CCD-RAW specified for photo quality, you
can process these photos using the RAW data processing software.
You can use the following software according to your needs:
EPSON PhotoRAW Process ERF (EPSON RAW File) files provided from
DSC (Digital Still Camera) in a batch using
optional parameters.
EPSON RAW Plug-In Used with Adobe Photoshop 7, Photoshop CS, or
Adobe Photoshop Elements 2.0 to display ERF
(EPSON RAW File) files on these applications.
Note:
❏ To install the EPSON PhotoRAW or EPSON RAW Plug-In software,
you need administrator privileges.
❏ For CCD-RAW files, only ERF format is supported.
❏ When processing ERF files, copy it from an SD memory card to the hard
disk drive beforehand. If processing ERF files on a memory card, it may
take a long time.

System Requirements

The system requirements for using the camera with a computer are as
follows:
44
Using the RAW Data Processing Software
Windows: OS: Microsoft
Edition, Me, 2000 Professional, XP Home
Edition, XP Professional
Hard Ware: Pentium III 1 GHz or higher (Pentium IV 2
GHz or higher is recommended)
Memory: 256 MB or more (512 MB or more is
recommended)
Hard Disk: 5 MB or more free memory is required for
installation
170 MB or more free memory is required for
operation
SVGA (800 × 600) or higher, 24 bit color or
Display:
higher
Macintosh: OS: Mac OS
Mac OS
Hard Ware: PowerPC G3 233 MHz or higher (PowerPC
G4 1GHz or higher is recommended)
Memory: 42 MB for application memory
Hard Disk: 50 MB or more free memory is required for
installation
170 MB or more free memory is required for
operation
800 × 600 or higher, 32000 colors or more
Display:
Caution:
c
EPSON PhotoRAW is available only for Windows.
® ®
Windows 98, 98 Second
®
9.1 - 9.2.2 (CarbonLib compatible),
®
10.2 or later