Communicate Mode; Setup Mode - Epson PhotoPC2100Z Service Manual

PhotoPC 2100Z
Complete off (Power is turned off from the power saving mode 2 after 2 minutes
of no operation)
Table 1-24. Camera Status
Default
LED ON
LCD Monitor ON
Lens ON
CPU ON
Note: *1: The orange LED flashes (Duty is changed).
*2: Startup time is longer than in power saving mode 1.
AC ADAPTER
The camera enters the power saving mode1 after 15 minutes of no operation. After
further 5 minutes of no operation, power will turn completely off.

1.4.7.3 Communicate Mode

Table 1-25. Communicate Mode
Battery Power saving is not enabled in the communication mode.
AC Adapter Power saving is not enabled in the communication mode.
Product Description
Power Saving Power Saving Complete
Mode 1 Mode 2
*1
ON ON
OFF OFF
ON ON
*2
ON OFF
Communication

1.4.7.4 SETUP Mode

BATTERY
Power saving mode 1 (The camera enters this mode after 2 minutes of no
operation)
OFF
Power saving mode 1 is entered after displaying icon animation.
OFF
OFF Restoration condition: The camera is restored to the normal status by one of the
following events:
OFF
The Shutter Button is pressed.
OFF
The Playback Button is pressed.
One of the buttons (including the DPOF button) on the back is pressed.
The W/T Button is pressed.
The communication cable is connected.
When the communication cable is connected, the camera enters the
communication mode.
Power saving mode 2 (The camera enters this mode from power saving mode 1
after 30 seconds of no operation)
Restoration condition: The camera is restored to the normal status by one of the
following events:
The Shutter Button is pressed.
The Playback Button is pressed.
One of the buttons (including the DPOF button) on the back is pressed.
The W/T Button is pressed.
The communication cable is connected.
When the communication cable is connected, the camera enters the
communication mode.
Interface Specifications
Revision B
29