Housing Disassembly; Rear Cover Removal - Epson PhotoPC2100Z Service Manual

PhotoPC 2100Z

4.2.1 Housing Disassembly

4.2.1.1 Rear Cover Removal

1. Remove the one screw (THB1.7x5.5) and the four screws (THB1.7x4.0) securing the
Rear Cover.
THB1.7x4.0
Figure 4-2. Rear Cover Securing Screws
NOTE: Tightening torque for screws THB1.7X5.5 and THB1.7x4.0: 0.12N⋅m
2. Disengage the two hooks with which the Rear Cover and the Front Cover are engaged,
and open the Rear Cover.
Disassembly and Assembly
THB1.7x4.0
THB1.7x5.5
THB1.7x4.0
Hooks
Figure 4-3. Rear Cover Removal
3. Disconnect the FFC of the Rear Cover from the connector CN1104 on the Main Circuit
Board. At this point, also the Battery Cap and the connector cover come off.
When connecting the FFC, make sure that it is free from
C H E C K
P O I N T slanting or floating insertion and be sure to lock the FFC
correctly.
Take care not to catch the FFC between the Front Cover and
the Rear Cover.
Disassembly
Revision B
CN1104
50