Firmware Upload By Cf Card - Epson PhotoPC3100Z Service Manual

PhotoPC 3100Z

5.4.9.2 Firmware Upload By CF Card

It is possible to update the firmware of camera using the CF card,but not depending on
PC. The procedure is as follows.
1. Create "firmware" folder on the PC desktop. (PC must have PCMCIA card slot.)
2. Put the firmware file in this folder.
3. Insert the PCMCIA adapter with PCMCIA CF card inserted. Adapter is defined as
the removal disk.
4. Copy "firmware" folder to the root of the PCMCIA adapter, using explore.
5. Take the CF card out of PCMCIA and insert it to PhotoPC 3100Z.
6. Turn the dial switch to the "PLAYBACK mode" and turn the power on.
7. The current firmware version appears on the monitor and push on "YES" button.
Then, the firmware upload mode will be strated.
8. The new firwmware version appears on the monitor and push "No" button.
9. Turn off the camera and remove the CF card.
C A U T I O N When remove the PCMCIA card, the card must be off line.
Adjustment Adjustment
Revision B
96