Sinking Lens Control; Setting Stored - Epson PhotoPC3100Z Service Manual

PhotoPC 3100Z

1.4.2 Sinking Lens Control

CONDITIONS TO MOVE THE LENS FORWARD
When the camera is set ready to take picture with the lens sunk.
(When powering ON the camera or when mode is switched by dial switch.)
When the camera received the command from the PC to move the lens forward.
CONDITIONS TO SINK THE LENS
When powering OFF the camera with the lens craned.
When battery power is exhausted.

1.4.3 Setting Stored

You can store setting in the camera and these data are classified into three levels: A to
C.
Rank A
Data are stored in the flash ROM and remained until complete reset.
Emulation setting
Including NTSC/ PAL.
Indication method of date setting (order of year, month and day, switching of
24 hours or 12 hours indication system).
Compression ratio setting (normal compression, low compression)
Digital zoom ON/OFF setting
Rank B
Data are stored until the back-up in the lithium ion secondary battery becomes
invalid.
Resolution switching
Flash switching
Program / Manual
Each setting of SETUP mode
All items except the ones listed in Rank A.
PRODUCT DESCRIPTION
Various settings on the SETUP mode
Not including the setting command.
Photometry method
Values on manual
Shutter speed / Aperture / Focus
Slide show setting
Date setting
When date is cleared: indicates date setting menu when LCD is on.
W/B custom setting
Program
Normal / Sports / Portrait / Landscape
H
resolution (Hypic/TIFF)
Rank C
Stored until the camera is turned off. Not including "off" of energy saving mode.
Macro / Digital zoom
W/B setting
AUTO / Fixed / Custom
Flash switch
EV compensation (exposure adjustment)
With sound / without sound (Video / Interval shooting)
Operation
Revision A
25