AirLive PoE-2600HD User Manual

AirLive PoE-2600HD User Manual

H.264 2.0 mega-pixel pt ip camera
Table of Contents

Advertisement

Quick Links

AirLive PoE-2600HD
/WN-2600HD
802.3af PoE H.264 2.0
Mega-Pixel PT IP Camera
/Wireless N H.264 2.0
Mega-Pixel PT IP Camera
User's Manual
1
AirLive PoE-2600HD/
WN-2600HD User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PoE-2600HD and is the answer not in the manual?

Questions and answers

Summary of Contents for AirLive PoE-2600HD

  • Page 1 AirLive PoE-2600HD /WN-2600HD 802.3af PoE H.264 2.0 Mega-Pixel PT IP Camera /Wireless N H.264 2.0 Mega-Pixel PT IP Camera User’s Manual AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 2 Serial No. ____________________ To prevent fire or shock hazard, do not expose the unit to rain or moisture. For AC Adaptor to avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 3: Declaration Of Conformity

    This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 4 This product contains some codes from GPL. In compliance with GPL agreement, AirLive will publish the GPL codes on our website. Please go to www.airlive.com...
  • Page 5: Table Of Contents

    4.1.9 IP Notification ..................49 4.2 Camera: Adjust Camera Parameters ..............52 4.2.1 Picture .....................52 4.2.2 Preset Setting ..................54 4.2.3 Tour Setting .....................55 4.3 System: Configure and Maintain System ............56 4.3.1 System ....................56 4.3.2 Date & Time.....................58 AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 6 Appendix D: Bandwidth Estimation................90 Appendix E: Specifications ..................91 Appendix F: Configure Port Forwarding Manually ...........93 Appendix G: DDNS Application ................96 Appendix H: Power Line Frequency ..............102 Appendix I: 3GPP ....................104 Appendix J: Enable UPnP of Windows XP ............105 AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 7: Introduction

    This camera is an inexpensive and fully scalable surveillance device. Because the Network Cameras can be plugged into your existing local area network (LAN), you will potentially save thousands of dollars from unnecessary cabling. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 8 Microsoft Internet Explorer 6.0 or later Microsoft Media Player 11.0 or later (to playback recorded file) VGA Monitor resolution 1280 x 1024 or higher Pentium-4 3.6 GHz or higher Memory Size: 1GB or more Windows XP, Vista, 7 AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 9: Package Contents

    If any of the above items are missing, please contact your dealer immediately. Note: Using a power supply with a different voltage than the one included with the Network Camera will cause damage and void the warranty for this product. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 10: Physical Description

    Lens & focus ring User could use this ring to adjust focus manually. Microphone The Camera has built-in an internal microphone. This microphone is hidden in the pinhole located on the front panel. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 11 Sometimes restarting the camera will make the system back to a normal state. If the system still got problems after restart, user can restore the factory default settings and install it again. To restore the device, please follow the steps below: AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 12 Appendix A in this manual for more information. The pin 1 is located at the right side of terminal block from rear view. Micro SD Card Slot User can insert a micro SD card into this slot for event recording. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 13: Mounting The Camera

    1. Introduction 1.4 Mounting the Camera Ceiling Mount 1. Fix the camera to L-type bracket with the two supplied screws 2. Fix the bracket and camera to the ceiling using two holly wall anchors and screws AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 14: Wall Mount

    1. Introduction Wall Mount 1. Fix the L-type bracket to the wall using two holly wall anchors and screws 2. Fix the camera to L-type bracket with the two supplied screws AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 15: Install The Camera In Lan

    The power LED turned on, it means the system is booting up successfully. Furthermore, if you have a proper network connection, and access to the camera, the LED will flash blue under wired mode. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 16: Preparation

    When you installed the Camera on a LAN environment, you have two easy ways to search your Cameras by IPWizard II or UPnP™ discovery. Here is the way to execute IPWizard II to discover Camera’s IP address and set up related parameter in a Camera. 2.1.1 Search AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 17 2. Preparation When launch the IPWizard II, a searching window will pop up. IPWizard II is starting to search Network Cameras on the LAN. The existed devices will be listed as below. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 18: View

    View button. Then you could see the video from camera directly. Furthermore you could double click the left button of mouse to link to the network device by browser. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 19: Lan

    2.1.3 LAN In case you want to change the IP related parameters of wired interface, please select the device you want to configure and click the LAN button. Relative settings will be carried out as below. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 20 2. Preparation You could modify the relative settings of the selected device. Click “<<” button will quit the LAN setting procedure and click “>>” button will move to next page as below. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 21 If you like to change username and/or password of the device, just click the check button. Then, the related fields will show up as below. After keying in new username and password, click “Submit” button to perform your setting accordingly. Click “<<” button will go back to previous page. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 22: Wireless (Wn-2600Hd Only)

    2.1.4 Wireless (WN-2600HD Only) In case you want to change the IP related parameters of wireless interface, please select the device you want to configure and click the WIRELESS button. Relative settings will be carried out as above. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 23 2. Preparation Click SSID to select your wireless AP or router and key in WEP or WPA key. Click >> to next step: AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 24 2. Preparation Make sure wireless setting and then submit it. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 25 2. Preparation Click OK to confirm these parameters, then IPWizard II will start to configure this camera with specified information. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 26 2. Preparation Once this step finished, IPWizard II will prompt you to unplug the Ethernet cable to activate wireless access. Then IPWizard II will prompt you to test wireless setting or finish wireless procedure as below. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 27: Upnp Of Windows® Xp, Vista Or 7

    DHCP server. However, if the device wants to be accessed from the WAN, its IP address needs to be setup as fixed IP, also the port forwarding or Virtual Server function of router needs to be setup. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 28: Access The Device From The Internet Explorer For The First Time

    2.4 Access the Device from the Internet Explorer for the First Time 1. Start the web browser on the computer and type the IP address of the Camera you want to monitor as below: The Login Window of the Camera is prompted: AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 29 For the first time use (default value), input the User Name: admin Password: airlive That’s, type in “admin” on the “USERNAME” and “airlive” on the “PASSWORD”. Click “OK” button to start the main menu. 3. According your browser’s security setting, the IE Web Page may prompt the “Security Warning”...
  • Page 30: Logging In As An User

    If you log in the Camera as an ordinary User, “Setting” function will be not accessible. 2.6 Logging in as an Administrator If you log in the Camera as the Administrator, you can perform all the settings provided by the device. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 31: Operating The Network Camera

    The device supports multi-profile function for H.264, MEPG4 and JPEG simultaneously. User can chose the proper and/or preferred profile which is listed here. Streaming Protocol User can select proper streaming protocol according to networking environment. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 32 Enlarge video to full screen display. : Enlarge video to full screen display. Press “ESC” key to disable this function. PTZ Control Click to display the following control panel: Camera direction Camera speed Preset Go tour Tour Auto pan AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 33 On the ActiveX control icon, click the LeftMouseButton, then a menu pop-up. This menu provides features that are unique to the ActiveX control. These features include: • “Digital Zoom”, • “Snapshot”, • “Record”, • “Volume”, • “About” AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 34 3. Operating the Network Camera Digital Zoom Click Digital Zoom to active this function as above. User can drag or scale the box over the video to adjust zoom ratio and position. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 35 Click Record to activate this function. Press Record button to start recording. The video file is saved as ASF format into your local PC. While you want to stop it, press Stop to stop recording. Select Browser, the pop-up window to select the save path and AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 36 Click Volume to activate this function. There are two control bars for speaker and microphone volume respectively. Scroll these control bars to adjust the audio attribute. Check the volume mute will mute the speaker output. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 37 3. Operating the Network Camera About Click About to show this ActiveX information. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 38: Administrating The Device

    Object Setup Object detection Detection Storage Status and configuration of SD card Recording List Files list inside the SD Card Event Server Setup FTP/TCP/HTTP server for event Event Schedule Configure the schedule while event triggered AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 39: Network: Configure Network Settings

    With this setting, the IP address is assigned automatically. If this device can not get an IP address within limited tries, the device will assign a default IP address, 192.168.0.100, by itself as the default IP address. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 40 If multiple devices are installed on the LAN and also required to be accessed from the WAN, then the HTTP Port can be assigned as the virtual server port mapping to support multiple devices. Click “OK” to save and enable the setting. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 41: Wireless (Wn-2600Hd Only)

    These settings should always be made in the camera first and secondly in the wireless access point. This ensures that the device is always accessible when making changes. Note that this function is only available for the model with WLAN capability. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 42 4. Administrating the Device Setting (Easy Installation): Provides a 2-step procedure to configure wireless setting: Step 1: Select SSID of wireless router or access point (AP). AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 43 The following information is provided: Interface Select: “Wired (Ethernet) only” or “Auto – wired if cable connected, otherwise wireless”: Choose wired or wireless mode. However, note that wired is priority. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 44 13 characters for 128-bit WEP. • HEX - In this method the string must be exactly 10 hexadecimal (0-9, A-F) characters for 64-bit WEP and 26 hexadecimal characters for 128-bit WEP. Web Key 1~4: − Key value of WEP. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 45: Ddns Service

    WAN IP address is when you want to access your device over the Internet. One of the possible solutions to the dynamic IP address problem comes in the form of a dynamic DNS service. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 46 As to xDSL environment, most of the users will use dynamic IP addresses. If users want to set up a web or a FTP server, then the Dynamic Domain Name Server is necessary. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 47: Pppoe

    Power on again, then the device will dial on to the ISP connect to the WAN through the xDSL modem. The procedures are • Connect to a LAN by DHCP or Fixed IP • Access the device; enter Setting Network PPPoE as below AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 48 Type the password for the PPPoE service which is provided by the ISP. IP address, Subnet mask, and Gateway (read only): Shows the IP information got from PPPoE server site. Status: Shows the Status of PPPoE connection. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 49: Streaming

    Enter the RTSP port number to use. The default value is 554. RTP Port: Specify the range of transmission port number of video stream. The default range is 50000 to 50999. User can specify a number between 1024 and 65535. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 50: Upnp

    (LAN) and you wish to make it available from the other (WAN) side of a NAT router. With NAT traversal properly configured, all HTTP traffic to an external HTTP port in the NAT router will be forwarded to the device. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 51: Bonjour

    Bonjour is an open protocol which Apple has submitted to the IETF as part of the ongoing standards-creation process. Bonjour: To enable or disable the Bonjour service here. Friendly Name: Shows the friendly name of this device here. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 52: Ip Filter

    You can enter different user’s IP address which are allowing enter or denying by the device. IP Filter: To enable or disable the IP filter function here. IP Filter Policy: Choose the filter policy where is denying or allowing. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 53: Ip Notification

    If enable this function, then the “Send to“and “Subject” fields need to be filled. Send To: Type the receiver’s e-mail address. This address is used for reply mail. Subject: Type the subject/title of the E-mail. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 54 Type the server name or the IP address of the TCP server. TCP Port: Set port number of TCP server. Message: The message will be sent to FTP server. HTTP Notification: If enable this function, then the fields below need to be filled. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 55 Type the user name for the HTTP Proxy. Proxy Login Password: Type the password for the HTTP Proxy. Custom parameter: User can set specific parameters to HTTP server. Message: The message will be sent to HTTP server. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 56: Camera: Adjust Camera Parameters

    4.2 Camera: Adjust Camera Parameters Use this menu to set the functions of the camera parameters of the device. 4.2.1 Picture Rotation: Turn the “Mirror” and “Vertical Flip” On or OFF. The image will be overturned as below. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 57 It should be higher or equal to LED ON Threshold. Delay Time: The delay time between LED ON/OFF switching. Note that Current Value is the current luminance from the captured video. It’s a useful reference to set LED ON/OFF Threshold. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 58: Preset Setting

    4. Administrating the Device 4.2.2 Preset Setting This page provides the edit tool to modify or delete the “Preset Setting” item by item. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 59: Tour Setting

    Wait Time: Type a period of time during which the camera is to stay at each preset point, between 0 to 36000 seconds. To use the camera tour function, user must preset some camera positions first. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 60: System: Configure And Maintain System

    It’s a unique number of each device for identification and this ID is used for DIPS. In the Appendix G, it describes how to locate your device from Internet by DDNS service. However, we provide another easier way to do the same job called Dynamic IP Service, DIPS®. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 61 To turn on or off Power LED (wireless LED if WLAN model). Log: User can check the system log information of the device, including the Main Info, Appended Info, Operator IP, and so on … AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 62: Date & Time

    Select an interval between 1 and 23 hours at which you want to adjust the device’s time referring to NTP server Time zone: Set the time difference from Greenwich Mean Time in the area where the device is installed. Daylight Saving: Disable or enable the daylight saving adjustment. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 63: Maintenance

    Backup Setting: To take a backup of all of the parameters, click this button. If necessary, it will then be possible to return to the previous settings, if settings are changed and there is unexpected behavior. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 64 (Note that it must make sure that the Firmware only applies to this device, once update, it will be burned into FLASH ROM of system.) 5. Once the firmware file was selected, click “Firmware Upgrade” button. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 65 Furthermore, the firmware upgrade procedure always is risk and do not try to upgrade new firmware if it’s not necessary. System Restart: The device is restarted without changing any of the network settings. It means the IP address of the device will not change after firmware upgrade. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 66: Video: Configure Profile

    User can only choose either Mega or 2 Mega modes. Mega mode can serve H.264, MPEG4, and JPEG streams up to 1280x720 resolution simultaneously. On the other hand, 2 Mega mode, it can streams up to 1600x1200 resolution simultaneously. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 67: Video Profile

    For VBR, user should choose the quality level to set the video quality rather than bit rate. The quality level is between 1 and 100. The higher value can reach the better quality but of course will consume higher bandwidth. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 68: Roi

    Defines the Intra/Inter-frame (I/P) ratio of this profile. For example, set the GOP to 30, then the video stream will have one Intra-frame every 30 frames. 4.4.3 ROI ROI means Region of Interest. Use this page to specify ROI window which ROI is QVGA resolution. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 69: Audio: Audio Parameters

    Mute the audio while pan and/or tilt motion Audio Mode: To select Simplex or Full duplex (2-way audio) mode Input Gain: To adjust gain of input audio Output Gain: To adjust gain of output audio AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 70: User: Manage User Name, Password And Login Privilege

    Administrator can access every function in this device. However, Viewers only can view the video and access limited function. PTZ Control: Authorize this user to control PTZ function or not. Add, update, and remove of Users account: Manage the user’s account of viewer user. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 71: E-Mail: Setup E-Mail Configuration

    Type the SMTP server name or the IP address of the SMTP server. Test: Send a test mail to mail server to check this account is available or not. SMTP Port: Set port number of SMTP service. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 72: Object Detection: Setup Object Detection

    Type the subject/title of the e-mail. 4.8 Object Detection: Setup Object Detection Use this menu to specify motion detection window 1 to window 10 and set the conditions for detection while observing a captured image. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 73 The lower object size will even small objects trigger motion detection too. Generally speaking, the smaller size will be easier to trigger event. Sensitivity Defines the sensitivity value of motion detection. The higher value will be more sensitivity. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 74: Storage: Status And Configuration Of Sd Card

    Enable automatic disk cleanup: Delete old recorded files while the conditions are reached as below. Remove recordings order than: Delete old files by days. Remove oldest recordings when disk is: Delete old files by left capacity. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 75: Recording List: Files List Inside The Sd Card

    You may setup FTP parameters for further operation of Event Schedule. That’s, if users want to send the alarm message to an FTP server, it will need to configure parameters here and also add at least one event schedule to enable event triggering as SMTP. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 76 Check the FTP server whether this account is available or not. FTP Login name: Type the user name for the FTP server. FTP Login Password: Type the password for the FTP server. FTP Port: Set port number of FTP service. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 77: Tcp Server

    User can specify multiple TCP servers as wish. Therefore, user needs to specify a name for each TCP server setting. TCP Server: Type the server name or the IP address of the TCP server. TCP Port: Set port number of TCP server. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 78: Http Server

    HTTP Login Password: Type the password for the HTTP server. Proxy Address: Type the server name or the IP address of the HTTP Proxy. Proxy Login name: Type the user name for the HTTP Proxy. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 79: Samba Server

    Type the server name or the IP address of the SAMBA server. Test: Check the SAMBA server whether this account is available or not. SAMBA Login name: Type the user name for the SAMBA server. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 80: Event Schedule: Configure The Event Schedule

    This menu is used to specify the schedule of Event or Schedule Trigger and activate the some actions provided by this device. Where the Schedule Trigger will be activated by user-define interval without event happened. Name: Name of the Event or Schedule. Enable: Enable or disable this Event or Schedule. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 81 Send file to FTP server by motion triggered always: Select event trigger Enable time: start from 00:00 to 24:00 every day Trigger by: Motion Area (Added in Object Detection page) Action : Send FTP (Add in Event Server -> FTP Server page) AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 82 Action : Send e-mail (Add in E-Mail page) To email address: You need to input the receiver email address. − Subject: You could specify the email subject. − Message: You could specify the email content. − AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 83 Enable time: Select Monday to Friday, and set start time from 18:00 and keep work in 6 hous. Trigger by : You do not need to choose it, because this will be triggered every minute Action : Voice Alert AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 84: Record

    Choose JPEG, AVI-JPEG, or AVI-H.264 file format. Record File Prefix: Define the prefix of recorded filename. JPEG Picture Numbers: Define the picture numbers of JPEG to be sent out. Pre-Trigger Duration: Define the maximum duration of pre-alarm. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 85 4. Administrating the Device Post-Trigger Duration: Define the maximum duration of post-alarm. Max File Size: Define the maximum buffer size of record file. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 86: Appendix

    This Network Camera provides a general I/O terminal block as below: Function 12VDC power supply (50mA maximum) Digital Input Alarm Output User can refer to the schematic below to make a proper connection between I/O connector and external sensor and output device. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 87 THAT REQUIRE LARGE AMOUNTS OF CURRENT. IN SOME CASES, A CUSTOM INTERFACE CIRCUIT (CUSTOMER PROVIDED) MAY HAVE TO BE USED. SERIOUS DAMAGE TO NETWORK CAMERA MAY RESULT IF A DEVICE IS CONNECTED TO THE EXTERNAL I/O THAT EXCEEDS ITS ELECTRICAL CAPABILITY. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 88: Appendix B: Troubleshooting & Frequently Asked Questions

    The HTTP port and RTSP firewall exists on the port need to be opened on the firewall or NAT router. network. The username and Username = admin and Password = airlive. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 89 IP camera. Please contact your dealer to get the approval routers list. Some IP cameras are • Maybe too many IP cameras have been installed on working but others are the LAN, and then NAT router is out of resource to AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 90 • Packet Filtering of the router may prohibit access from an external network. Refer to your router's manual for details. • Access the Network Camera from the Internet with the global IP address of the router and port number of Network Camera. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 91 • Might be caused from the firewall protection. Check the locally but not Internet firewall with your system or network externally. administrator. The firewall may need to have some settings changed in order for the device to be accessible AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 92 Pan/Tilt feature in conjunction with streaming audio and video. If you find that there is a significant delay while panning or tilting the camera, try disabling the audio streaming and/or reducing the video streaming size. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 93: Appendix C: Ping Ip Address

    If you want to make sure the IP address of the device, utilize the PING command as follows: Start a DOS window. Type ping x.x.x.x, where x.x.x.x is the IP address of the device. The replies, as illustrated below, will provide an explanation to the problem. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 94: Appendix D: Bandwidth Estimation

    256kbps~768kbps 192kbps~512kbps (QVGA) frame @ 30fps @ 30fps 640 x 480 20 ~ 50K byte per 512kbps~2048kbps 384kbps~1536kbps (VGA) frame @ 30fps @ 30fps 1280x1024 100 ~ 200k byte 512kbps~3076kbps (SXGA) per frame @ 15fps AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 95: Appendix E: Specifications

    Video Profile 20 profiles simultaneously Up to 30fps for all modes Frame Rate AE, AWB Noise reduction Color, brightness, sharpness, contrast Image Setting Mirror/Flip Privacy Masks Text, time and date overlay Streaming Simultaneously multi-profile streaming AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 96 Notification via email, HTTP, and TCP Alarm Events External output activation Go to PTZ preset position Audio alerting output Video Buffer Pre- and post- alarm buffering General 256MB 16MB Power Supply 12V DC external power adapter Power Consumption 6.5W AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 97: Appendix F: Configure Port Forwarding Manually

    Manually installing the device with a router on your network is an easy 3–step procedure as following: (1) Assign a local/fixed IP address to your device (2) Access the Router with Your Web browser (3) Open /Configure Virtual Server Ports of Your Router AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 98 Internet. Be sure to uncheck the Reset IP address at next boot button at the top of the screen after modifying the IP address. Failure to do so will reset the IP address when you restart your computer. Your WAN IP Address will be listed here. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 99 80 to something else, such as 8080. Not all routers are the same, so refer to your user manual for specific instructions on how to open ports. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 100: Appendix G: Ddns Application

    DSL or cable modem internet connection where your computer's IP address changes all the time!! DDNS service supports all top level domain names including but not limited to .com, .net, .org, .to, .uk etc. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 101 DDNS and PPPoE of the Networked Device in order to let the outside administrator be able to access through internet. Application Steps—DDNS & Domain Name (1). Visit the following web site: http://www.dyndns.org/ (2). Click “Account” AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 102 (3). After the columns show up at the left side, click “Create Account”. (4). Fill the application agreement and necessary information. a. Username b. E-mail address and confirmation c. Password and confirmation d. Submit all the input information and finish creating an account AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 103 (5). Check your e-mail mailbox. There will be an e-mail with a title “Your DynDNS Account Information“. Click the hyperlink address to confirm the DDNS service that you just applied. Then DDNS you applied activated. Click to confirm AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 104 DDNS server. Input your account (7). If the correct username and password are input, you can see the following picture at the top-right of the login page. (8). Click the “Services”. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 105 (Pink No.1) Then we pick a domain that is easy to remember. (Pink No.2) The 3rd step is to click “Offline Hostname” from Service Type. (Pink No.3) Finally, click the “Create Host” to submit the domain name information and finish DDNS application. (Pink No.4) AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 106: Appendix H: Power Line Frequency

    *Neutral and line wires are reversed Argentina 220V 50 Hz from that used in Australia and elsewhere. *Outlets typically controlled by adjacent switch. Australia 230V* 50 Hz Though nominal voltage has been officially changed to 230V, 240V is AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 107 Portugal 230V 50 Hz Spain 230V 50 Hz Sweden 230V 50 Hz Switzerland 230V 50 Hz Taiwan 110V 60 Hz Thailand 220V 50 Hz *Outlets typically controlled by United Kingdom 230V* 50 Hz adjacent switch. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 108: Appendix I: 3Gpp

    2. Use the following URL to access: rtsp://host/mpeg4/media.3gp Where host is the host name or IP address of the camera. Compatible 3G mobile phone: Please contact your dealer to get the approved list of compatible 3G phone. AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 109: Appendix J: Enable Upnp Of Windows Xp

    Appendix J: Enable UPnP of Windows XP Use the following steps to enable UPnP settings only if your operating system of PC is running Windows XP. Go to Start > Settings. Click Control Panel Click Add or Remove Programs AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 110 5. Appendix Click Add/Remove Windows Components The following screen will appear: Select Networking Services Click Details AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 111 5. Appendix Select Universal Plug and Play Click Ok Click Next AirLive PoE-2600HD/ WN-2600HD User’s Manual...
  • Page 112 5. Appendix Please wait while Setup configures the components. Click Finish AirLive PoE-2600HD/ WN-2600HD User’s Manual...

This manual is also suitable for:

Wn-2600hd

Table of Contents