AirLive POE-100CAM User Manual
  1. Manuals
  2. Brands
  3. AirLive Manuals
  4. IP Camera
  5. POE-100CAM
  6. User manual

AirLive POE-100CAM User Manual

Poe 1/3 sharp ccd dual stream ip camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

POE-100CAM
POE 1/3 Sharp CCD Dual
Stream IP Camera
User's Manual
AirLive POE-100CAM User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the POE-100CAM and is the answer not in the manual?

Questions and answers

Related Manuals for AirLive POE-100CAM

Summary of Contents for AirLive POE-100CAM

  • Page 1 POE-100CAM POE 1/3 Sharp CCD Dual Stream IP Camera User’s Manual AirLive POE-100CAM User’s Manual...

  • Page 2: Declaration Of Conformity

    5F., NO.6, Lane 130, Min-Chuan Rd., Hsin-Tien City, Taipei County, Taiwan Declare that the product 1/3 Sharp CCD Dual Stream IP Carema AirLive POE-100CAM is in conformity with In accordance with 2004/108/EC Directive and 1999/5 EC-R & TTE Directive Clause Description ■...
  • Page 3 Directiva disposiciones aplicables o exigibles de la 1999/5/CE. Directiva 1999/5/CE. ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ OvisLink Corp. ΔΗΛΩΝΕΙ OvisLink Corp izjavlja, da je ta AirLive POE-100CAM Ελληνική [Greek] ΟΤΙ AirLive POE-100CAM ΣΥΜΜΟΡΦΩΝΕΤΑΙ Slovensko v skladu z bistvenimi zahtevami in ostalimi ΠΡΟΣ...
  • Page 4 • Use a soft, dry cloth to clean the external surfaces of the device. Stubborn stains can be removed using a soft cloth dampened with a small quantity of detergent solution, then wipe dry. • Do not use volatile solvents such as alcohol, benzene or thinners as they may damage the surface. AirLive POE-100CAM User’s Manual...

  • Page 5: Table Of Contents

    ........................34 CHEDULE 7.5 A ......................35 LARM UFFER 7.6 Motion Detection ......................36 7.7 S ........................37 YSTEM ........APPENDIX A – FRAME RATE & BIT RATE TABLE ........APPENDIX B – STORAGE REQUIREMENT TABLE AirLive POE-100CAM User’s Manual...

  • Page 6: Chapter 1. Installation

    1. Check the package contents against the list below. 2. Set the device. See IP Installer User Manual on the available methods. 1.2 Package Contents Item Description IP Camera Air Live POE-100CAM IP Camera Power Adapter Country-specific User Manual / IP Installer and Document Lens Camera Lens...

  • Page 7: Chapter 2. Using Ip Camera Via Mobile Phone

    • You can also use RTSP clients (RealPlayer, MPlayer, Windows Media Player, Quicktime…etc.) to view RTSP streaming, just type in “rtsp://<IP>:<PORT>/video.3gp” as the Player’s URL 2.2 2.5G Mobile Phone viewing For 2.5G mobile phone viewing, type “<IP>/mobile.wml” into your 2.5G web browser. <IP> is the IP address of your IP camera. AirLive POE-100CAM User’s Manual...

  • Page 8: Chapter 3. Using Ip Camera Via Web Browser

    •If you can’t view the recorded video file (missing video decoder), please install Xvid codec while installing Intelligent IP Installer. (For Windows 98, ME or 2000 server, the codec might not work properly. You’ll need to download Xvid codec 1.0 from the internet. AirLive POE-100CAM User’s Manual...

  • Page 9: Chapter 4. Initial Accessing The Ip Camera

    4. The Software scans the network and finds the IP Camera, then list in the dialog box. 5. If the Camera’s IP address is in the same IP segment as your LAN, select the founded IP Camera and click “Link to IE” to proceed. AirLive POE-100CAM User’s Manual...
  • Page 10 7. Follows setup instruction to change the IP address of the IP Camera. Change IP Here 8. At the end of the setup instruction, the IP Camera Reboots 9. Click the Search button to search again 10. Click “Link to IE” to proceed. AirLive POE-100CAM User’s Manual...
  • Page 11 11. The tool launch your Internet Explorer and prompts up the login dialog 12. Enter default user name and password: admin / airlive 13. After a successful login, the browser asks for ActiveX installation. 14. Install the ActiveX, and the browser shows the video stream.
  • Page 12 3. The monitor image will be displayed in your browser. AirLive POE-100CAM User’s Manual...

  • Page 13: Chapter 5. Configuration Of Main Menu

    Video Buffer: Turn the Video Buffer function On/Off. The Video Buffer function makes the streaming more smoothly in unsteady network environment, but might cause a little delay in live viewing. 5.3 Image Setup You can use the tool bar to optimize video brightness, contrast, and saturation. AirLive POE-100CAM User’s Manual...

  • Page 14: Live View

    It means the speakers of your computer are turned on to transmit the sounds from the connected IP camera(s). Similarly, means you can broadcast to the connected IP camera(s) via the Ethernet using your microphone. Video play buttons: ：Pause the current video ：Play the video. ：Stop the current video. ：Record the current video. AirLive POE-100CAM User’s Manual...

  • Page 15: Chapter 6. Setting

    Click the “Basic” folder to display the sub folders, including System, Camera, Network, and Security. 6.2 System 6.2.1 Information The Information page provides you with product factory information, including Product name, Firmware version, and Web version. AirLive POE-100CAM User’s Manual...
  • Page 16 NTP server name：Type the host name or IP address of the NTP server, up to 64 characters. Time zone：Select the time zone and time difference from Greenwich Mean Time in the area where the device is installed from the pulldown box. AirLive POE-100CAM User’s Manual...
  • Page 17 • Do not turn off the device power or disconnect the network until the upgrading is completed. Upload language pack：Upgrade the device language pack. Click Browse and select the file for upgrading. A confirmation dialogue will appear. Click OK to start upgrading. The upgrade is applied immediately. The default language is “Englsh” AirLive POE-100CAM User’s Manual...

  • Page 18: Camera

    Overlay：Select to add Text Overlay or Privacy Mask on/off the display screen. Text Overlay：Enables users to see some information on the display screen, including Date/Time and user-defined text. You can also change the background color. Privacy Mask：Enables users to conceal an area of the video image. AirLive POE-100CAM User’s Manual...
  • Page 19 Multicast address: Specify the multicast server address. Video / Audio Port: Specify the transmission port number of the video data. Specify an even number from 1024 to 65534. Time-To-Live: Set the maximum TTL that multicast can pass through. AirLive POE-100CAM User’s Manual...
  • Page 20 • The selected frame rate and bit rate are a tentative value. The actual frame rate and bit rate may be different according to the image size, the shooting scene or the network condition. 6.3.2.2 Mobile View AirLive POE-100CAM User’s Manual...
  • Page 21 Frame rate：Set the frame rate of the MPEG4 image. Selectable values are 5, 10, 15, 20 fps. The unit “fps” stands for “frames sent per second”. Quality Fixed Bitrate：Set the bit rate of MPEG4 image transmission for a line. Selectable values are 64, 32, and 16kbps.. AirLive POE-100CAM User’s Manual...
  • Page 22 Frame rate ： Set the frame rate of the MJPEG image. Selectable values are 5, 10, 15 fps. The unit “fps” stands for “frames sent per second”. Quality Auto：The quality will be automatically decided. Fixed quality：The selectable values are Medium, Standard, Good, Detailed and Excellent. AirLive POE-100CAM User’s Manual...

  • Page 23: Network

    • When you have set the HTTP port number to a number other than 80 on the Network setting page or in the Setup Program, access the device by typing the IP address of the device on the web browser as follows: Example: when HTTP port number is set to 2000 http://192.168.1.100:2000/ AirLive POE-100CAM User’s Manual...
  • Page 24 Use the following DNS server address：Select this when you set the fixed address as the IP address of DNS server. Primary DNS server：Enter the IP address of the primary DNS server. Secondary DNS server：Enter the IP address of the secondary DNS server. AirLive POE-100CAM User’s Manual...
  • Page 25 Re-type password：Re-type the password to confirm. Host name：Enter the host name that is registered to the DDNS server. Note： • When you want to use DDNS function, you need to register an account in DDNS server first. AirLive POE-100CAM User’s Manual...
  • Page 26 MJPEG viewer port：Enter the MJPEG viewer port number and default MJPEG viewer port is 8070. MJPEG viewer port(SSL): Enter the MPEG4 SSL viewer port and default is 8071. MPEG4 RTSP port: Enter the MPEG4 RTSP port, default value is 8050 for computer view, 8030 for mobile view. AirLive POE-100CAM User’s Manual...
  • Page 27 Administrator e-mail address ： Type the Administrator e-Mail address up to 64 characters. used for reply mail and sending system messages from the SMTP server. Subject：Type the subject/title of the e-Mail up to 64 characters. With respect to mail which is sent AirLive POE-100CAM User’s Manual...

  • Page 28: Security

    User name：Set a user name between 5 and 16 characters. Password：Set a password between 5 and 16 characters. Re-type password：Re-type the password to confirm. Viewer Mode：Set a user to Admin, Operator or Viewer mode. Viewer authentication：Allows any viewer direct access to Live View. AirLive POE-100CAM User’s Manual...
  • Page 29 HTTPS function, then set up the connection policy for different users, and click “Set Policy” to apply the settings. Create & Install: Create a self-signed certificate for HTTPS to recognize. Installed Certificate: Display or remove the properties of the installed certificate. HTTPS Connection Policy: Set HTTPS connection policy for different level of users. AirLive POE-100CAM User’s Manual...

  • Page 30: Chapter 7. Advance

    Passive mode：Set whether you use the passive mode of FTP server or not when connecting to FTP server. Select On to connect to FTP server using the passive mode. Attached file type：Set attached file type to MJPEG or MPEG.4 AirLive POE-100CAM User’s Manual...
  • Page 31 Click Alarm buffer to display the Alarm buffer setting menu. For details, see “Setting the Alarm Buffer — Alarm buffer setting Menu on page. Effective period：Set the period when the periodical sending is effective. Always：The periodical sending is always effective. AirLive POE-100CAM User’s Manual...
  • Page 32 Schedule：You can specify the period when the periodical sending is effective in the schedule setting in the other section. Click Schedule and the setting menu for the effective period is displayed. (“Setting the Schedule — Schedule setting Menu” on page 34) AirLive POE-100CAM User’s Manual...

  • Page 33: Smtp

    POP (receiving mail) server name up to 64 characters, or type the IP address of the POP server. This setting is necessary when the SMTP server which sends e-mails performs authentication using the POP user account. AirLive POE-100CAM User’s Manual...
  • Page 34 Alarm sending of the alarm tab is set to On, the characters standing for the sensor type added to the subject. Message：Type the text of the E-mail up to 384 characters. (A line break is equivalent to 2 characters.) AirLive POE-100CAM User’s Manual...
  • Page 35 (pre-alarm, post-alarm). If you do not select it, only the image of the moment of the alarm detection is forwarded. Click Alarm buffer to display the Alarm buffer setting menu. For details, see “Setting the Alarm Buffer — Alarm buffer setting Menu on page. AirLive POE-100CAM User’s Manual...
  • Page 36 Schedule：You can specify the period when the periodical sending is effective in the schedule setting in the other section. Click Schedule and the setting menu for the effective period is displayed. (“Setting the Schedule — Schedule setting Menu” on page 34) AirLive POE-100CAM User’s Manual...

  • Page 37: Http Event

    HTTP server. HTTP client setting menu is composed of two tabs, General and Alarm sending. 7.3.1 General HTTP event: Set up the HTTP server URL, port, user id, password, and proxy server settings. AirLive POE-100CAM User’s Manual...
  • Page 38 Always：The periodical sending is always effective. Schedule：You can specify the period when the periodical sending is effective in the schedule setting in the other section. Click Schedule and the setting menu for the effective period is displayed. AirLive POE-100CAM User’s Manual...

  • Page 39: Schedule

    When this is checked, the Start time and End time set to Mon (Monday) are applied to all days. In this case, the Start time and End time of the other days than Mon (Monday) cannot be input. AirLive POE-100CAM User’s Manual...

  • Page 40: Alarm Buffer

    Post alarm period：Type it with recording time of the image/audio after the alarm detection. Note： • The value of Recording capacity differs depending on Image size, Bitrate (for MPEG4) and Image quality (for MPEG4 and MJPEG) in the camera setting menu. AirLive POE-100CAM User’s Manual...

  • Page 41: Motion Detection

    3. Use tool bar to set Threshold and Sensitivity value. 4. Follow the steps to set the other Motion Detection. 5. Click the OK to save the setting. Note： • Be careful! Motion Detection function don’t work with Patrol function at same time. AirLive POE-100CAM User’s Manual...

  • Page 42: System Log

    7.7 System Log The System Log function allows users to review any changes and events happened. The system starts logging automatically after started. Remote Log: Enables user to send the log data to a specified log server. AirLive POE-100CAM User’s Manual...

  • Page 43: Appendix A - Frame Rate & Bit Rate Table

    1536 1500 704*480 1536 1700 704*480 1024 1050 704*480 1024 1100 704*480 704*480 352*240 1536 1500 352*240 1536 1600 352*240 1024 1100 352*240 1024 1100 352*240 352*240 176*120 1024 1000 176*120 1024 176*120 176*120 176*120 176*120 AirLive POE-100CAM User’s Manual...
  • Page 44 704*480 Good 1500 704*480 Medium 1300 704*480 Medium 352*240 Excellent 2800 352*240 Excellent 1200 352*240 Good 1000 352*240 Good 352*240 Medium 176*120 Medium 176*120 Excellent 1000 176*120 Excellent 176*120 Good 176*120 Good 176*120 Medium 176*120 Medium AirLive POE-100CAM User’s Manual...
  • Page 45 1600 704*576 1536 1700 704*576 1024 1100 704*576 1024 1200 704*576 704*576 352*288 1536 1500 352*288 1536 1600 352*288 1024 1100 352*288 1024 1100 352*288 352*288 176*144 1024 1000 176*144 1024 1000 176*144 176*144 176*144 176*144 AirLive POE-100CAM User’s Manual...
  • Page 46 704*576 Good 2500 704*576 Good 1200 704*576 Medium 1000 704*576 Medium 352*288 Excellent 1700 352*288 Excellent 352*288 Good 352*288 Good 352*288 Medium 352*288 Medium 176*144 Excellent 176*144 Excellent 176*144 Good 176*144 Good 176*144 Medium 176*144 Medium AirLive POE-100CAM User’s Manual...

  • Page 47: Appendix B - Storage Requirement Table

    B.4 MJPEG Storage Requirement GB / channel / day @ 15fps Quality 704*480 352*240 176*120 Excellent 79.1 29.5 10.5 Detailed 52.7 15.8 Good 36.9 10.5 Standard 21.1 Medium 13.7 B.5 MJPEG Storage Requirement GB / channel / day Image-Size Quality Setting Frame-Rate Setting Current Bitrate AirLive POE-100CAM User’s Manual...
  • Page 48 704*480 Good 15.8 704*480 Medium 13.7 704*480 Medium 352*240 Excellent 29.5 352*240 Excellent 12.7 352*240 Good 10.5 352*240 Good 352*240 Medium 176*120 Medium 176*120 Excellent 10.5 176*120 Excellent 176*120 Good 176*120 Good 176*120 Medium 176*120 Medium AirLive POE-100CAM User’s Manual...

Table of Contents