AirLive OD-2060HD User Manual

AirLive OD-2060HD User Manual

2-megapixel pan-tilt outdoor vandal poe ipcam

Advertisement

Quick Links

AirLive OD-2060HD
2-MegaPixel Pan-Tilt Outdoor
Vandal PoE IPCAM
User's Manual
1
AirLive OD-2060HD User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OD-2060HD and is the answer not in the manual?

Questions and answers

Summary of Contents for AirLive OD-2060HD

  • Page 1 AirLive OD-2060HD 2-MegaPixel Pan-Tilt Outdoor Vandal PoE IPCAM User’s Manual AirLive OD-2060HD User’s Manual...
  • Page 2 Serial No. ____________________ To prevent fire or shock hazard, do not expose the unit to rain or moisture. For AC Adaptor to avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only AirLive OD-2060HD User’s Manual...
  • Page 3: Declaration Of Conformity

    This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. AirLive OD-2060HD User’s Manual...
  • Page 4 We reserve the right to make any modification to this manual or the information contained herein at any time without notice. The software described herein may also be governed by the terms of a separate user license agreement. AirLive OD-2060HD User’s Manual...
  • Page 5: Table Of Contents

    4.1.9 IP Filter ....................37 4.1.10 IP Notification ..................38 4.2 Camera: Adjust Camera Parameters ..............40 4.2.1 Picture .....................40 4.2.2 Privacy Mask ...................42 4.2.3 Preset Setting ..................42 4.2.4 Tour Setting .....................43 4.3 System: Configure and Maintain System ............44 4.3.1 System ....................44 AirLive OD-2060HD User’s Manual...
  • Page 6 Appendix D: Bandwidth Estimation................79 Appendix E: Specifications ..................80 Appendix F: Configure Port Forwarding Manually ...........82 Appendix G: DDNS Application ................85 Appendix H: Power Line Frequency ................92 Appendix I: 3GPP ....................94 Appendix J: Enable UPnP of Windows XP ..............95 AirLive OD-2060HD User’s Manual...
  • Page 7: Introduction

    Microsoft® Internet Explorer you get instant, on demand video streams. Within minutes you can set up the device to capture a video sequence to a PC. The live video can be uploaded to a website for the world to see. AirLive OD-2060HD User’s Manual...
  • Page 8 Microsoft Internet Explorer 6.0 or later Microsoft Media Player 11.0 or later (to playback recorded file) Monitor with 1280 x 1024 or higher resolution Pentium-4 3.6 GHz or higher Memory Size: 1GB or more Windows XP, Vista, 7 AirLive OD-2060HD User’s Manual...
  • Page 9: Package Contents

    1. Introduction 1.2 Package Contents User can find the following items in the package: 1. OD-2060HD is the main element of the product. 2. Accessory Packet 3. Power Adapter dedicates 12V DC electric power output to Network Camera. 4. User’s Manual CD provides installation software, application program, important information and instructions for operating the Network Camera.
  • Page 10 Note: Restoring the factory default setting will lose the all previous settings included IP address forever. User needs to run the IPWizard II program to search the device and configure it to let the device work properly again. AirLive OD-2060HD User’s Manual...
  • Page 11: Mounting The Camera

    5. MIC in (audio in) Connect a microphone to the network camera. 6. Line out (audio out) Connect a loud speaker to the network camera. This function is for voice alerting and two-way audio. 1.4 Mounting the Camera AirLive OD-2060HD User’s Manual...
  • Page 12: Install The Camera In Lan

    Once you have installed the camera well and powered it on, the power LED will turn on later. The power LED turned on, it means the system is booting up successfully. Furthermore, if you have a proper network connection, and access to the camera, the LED will flash blue under wired mode. AirLive OD-2060HD User’s Manual...
  • Page 13: Preparation

    When you installed the Camera on a LAN environment, you have two easy ways to search your Cameras by IPWizard II or UPnP™ discovery. Here is the way to execute IPWizard II to discover Camera’s IP address and set up related parameter in a Camera. 2.1.1 Search AirLive OD-2060HD User’s Manual...
  • Page 14 2. Preparation When launch the IPWizard II, a searching window will pop up. IPWizard II is starting to search Network Cameras on the LAN. The existing devices will be listed as below. AirLive OD-2060HD User’s Manual...
  • Page 15: View

    View button. Then you could see the video from camera directly. Furthermore you could double click the left button of mouse to link to the network device by browser. AirLive OD-2060HD User’s Manual...
  • Page 16: Lan

    2.1.3 LAN In case you want to change the IP related parameters of wired interface, please select the device you want to configure and click the LAN button. Relative settings will be carried out as below. AirLive OD-2060HD User’s Manual...
  • Page 17 2. Preparation You could modify the relative settings of the selected device. Click “<<” button will quit the LAN setting procedure and click “>>” button will move to next page as below. AirLive OD-2060HD User’s Manual...
  • Page 18 If you like to change username and/or password of the device, just click the check button. Then, the related fields will show up as below. After keying in new username and password, click “Submit” button to perform your setting accordingly. Click “<<” button will go back to previous page. AirLive OD-2060HD User’s Manual...
  • Page 19: Upnp Of Windows® Xp, Vista Or 7

    Windows XP. Note: Windows 2000 does not support UPnP feature. To discover your device, go to your Desktop and click My Network Places. Click the targeted Device. Then Internet Explorer will connect to this Network Camera automatically. AirLive OD-2060HD User’s Manual...
  • Page 20: Install The Device Behind A Nat Router

    2. Enable UPnP NAT traversal option of the Network Camera Refer to Setting Network UPnP page for detail NAT traversal setting. Note that this option is default enabled. 3. Access your Network Camera by DIPS Refer to Setting System System page for detail DIPS information. AirLive OD-2060HD User’s Manual...
  • Page 21: Access The Device From The Internet Explorer For The First Time

    3. According your browser’s security setting, the IE Web Page may prompt the “Security Warning” window. If so, select “Yes” to install and run the ActiveX control into your PC. Otherwise, the system will load the ActiveX silently. AirLive OD-2060HD User’s Manual...
  • Page 22: Logging In As An User

    If you log in the Camera as an ordinary User, “Setting” function will be not accessible. 2.6 Logging in as an Administrator If you log in the Camera as the Administrator, you can perform all the settings provided by the device. AirLive OD-2060HD User’s Manual...
  • Page 23: Operating The Network Camera

    The device supports multi-profile function for H.264, MEPG4 and JPEG simultaneously. User can chose the proper and/or preferred profile which is listed here. Streaming Protocol User can select proper streaming protocol according to networking environment. Language The device could provide multiple languages to meet customer’s requirement. AirLive OD-2060HD User’s Manual...
  • Page 24 Enlarge video to full screen display. : Enlarge video to full screen display. Press “ESC” key to disable this function. PTZ Control Click to display the following control panel: Camera directio Camera speed Preset Go tour Tour Auto pan AirLive OD-2060HD User’s Manual...
  • Page 25 On the ActiveX control icon, click the LeftMouseButton, then a menu pop-up. This menu provides features that are unique to the ActiveX control. These features include: • “Digital Zoom”, • “Snapshot”, • “Record”, • “Volume”, • “About” AirLive OD-2060HD User’s Manual...
  • Page 26 3. Operating the Network Camera Digital Zoom Click Digital Zoom to active this function as above. User can drag or scale the box over the video to adjust zoom ratio and position. AirLive OD-2060HD User’s Manual...
  • Page 27 ASF format into your local PC. While you want to stop it, press Stop to stop recording. Select Browser, the pop-up window to select the save path and file name prefix, select OK to continue. AirLive OD-2060HD User’s Manual...
  • Page 28 Volume Click Volume to activate this function. There are two control bars for speaker and microphone volume respectively. Scroll these control bars to adjust the audio attribute. Check the volume mute will mute the speaker output. AirLive OD-2060HD User’s Manual...
  • Page 29 3. Operating the Network Camera About Click About to show this ActiveX information. AirLive OD-2060HD User’s Manual...
  • Page 30: Administrating The Device

    Setup user name, password and login privilege E-Mail Setup E-Mail configuration Object Detection Setup Object detection Recording List Files list inside the SD Card Event Server Setup FTP/TCP/HTTP server for event Event Schedule Configure the schedule while event triggered AirLive OD-2060HD User’s Manual...
  • Page 31: Network: Configure Network Settings

    This section provides the menu for connecting the device through Ethernet cable. MAC address: Displays the Ethernet MAC address of the device. Note that user can not change it. Obtain IP address automatically (DHCP): DHCP: Stands for Dynamic Host Configuration Protocol. AirLive OD-2060HD User’s Manual...
  • Page 32 If multiple devices are installed on the LAN and also required to be accessed from the WAN, then the HTTP Port can be assigned as the virtual server port mapping to support multiple devices. Click “OK” to save and enable the setting. AirLive OD-2060HD User’s Manual...
  • Page 33: Http Secure

    To enable or disable the HTTP Secure protocol here. The camera can be set to allow both HTTP and HTTP Secure connections, or allow HTTP Secure connections only. Port: The port specified for HTTP Secure connections to access the camera. AirLive OD-2060HD User’s Manual...
  • Page 34: Ddns Service

    As to xDSL environment, most of the users will use dynamic IP addresses. If users want to set up a web or a FTP server, then the Dynamic Domain Name Server is necessary. AirLive OD-2060HD User’s Manual...
  • Page 35 Server name: Choose the built-in DDNS server. DDNS Host: The domain name is applied of this device. User name: The user name is used to log into DDNS. Password: The password is used to log into DDNS. AirLive OD-2060HD User’s Manual...
  • Page 36: Pppoe

    Power on again, then the device will dial on to the ISP connect to the WAN through the xDSL modem. The procedures are • Connect to a LAN by DHCP or Fixed IP • Access the device; enter Setting Network PPPoE as below AirLive OD-2060HD User’s Manual...
  • Page 37 Type the password for the PPPoE service which is provided by the ISP. IP address, Subnet mask, and Gateway (read only): Shows the IP information got from PPPoE server site. Status: Shows the Status of PPPoE connection. AirLive OD-2060HD User’s Manual...
  • Page 38: Streaming

    Enter the RTSP port number to use. The default value is 554. RTP Port: Specify the range of transmission port number of video stream. The default range is 50000 to 50999. User can specify a number between 1024 and 65535. AirLive OD-2060HD User’s Manual...
  • Page 39: Upnp

    (WAN) side of a NAT router. With NAT traversal properly configured, all HTTP traffic to an external HTTP port in the NAT router will be forwarded to the device. UPnP: To enable or disable the UPnP service here. AirLive OD-2060HD User’s Manual...
  • Page 40: Bonjour

    Bonjour is an open protocol which Apple has submitted to the IETF as part of the ongoing standards-creation process. Bonjour: To enable or disable the Bonjour service here. Friendly Name: Shows the friendly name of this device here. AirLive OD-2060HD User’s Manual...
  • Page 41 4. Administrating the Device AirLive OD-2060HD User’s Manual...
  • Page 42: Onvif

    Open Network Video Interface Forum) protocol for the exchange of information between network video devices including automatic device discovery, video streaming and intelligence metadata. ONVIF: To enable or disable ONVIF functions here. ONVIF Version: Choose the version of ONVIF here. AirLive OD-2060HD User’s Manual...
  • Page 43: Ip Filter

    You can enter different user’s IP address which are allowing enter or denying by the device. IP Filter: To enable or disable the IP filter function here. IP Filter Policy: Choose the filter policy where is denying or allowing. AirLive OD-2060HD User’s Manual...
  • Page 44: Ip Notification

    Type the receiver’s e-mail address. This address is used for reply mail. Subject: Type the subject/title of the E-mail. TCP Notification: If enable this function, then the “TCP Server“, “TCP Port”, and “Message” fields need to be filled. AirLive OD-2060HD User’s Manual...
  • Page 45 Type the user name for the HTTP Proxy. Proxy Login Password: Type the password for the HTTP Proxy. Custom parameter: User can set specific parameters to HTTP server. Message: The message will be sent to HTTP server. AirLive OD-2060HD User’s Manual...
  • Page 46: Camera: Adjust Camera Parameters

    4.2 Camera: Adjust Camera Parameters Use this menu to set the functions of the camera parameters of the device. 4.2.1 Picture Rotation: Turn the “Mirror” and “Vertical Flip” On or OFF. The image will be overturned as below. AirLive OD-2060HD User’s Manual...
  • Page 47 Day Off Threshold (0~10000): this value set the threshold to turn off white-light LED. Delay Time: The delay time between ICR switching. Note that Current Value is the current luminance from the captured video. It’s a useful reference to set ICR ON/OFF Threshold. AirLive OD-2060HD User’s Manual...
  • Page 48: Privacy Mask

    4. Administrating the Device 4.2.2 Privacy Mask 4.2.3 Preset Setting This page provides the edit tool to modify or delete the “Preset Setting” item by item. AirLive OD-2060HD User’s Manual...
  • Page 49: Tour Setting

    Wait Time: Type a period of time during which the camera is to stay at each preset point, between 0 to 36000 seconds. To use the camera tour function, user must preset some camera positions first. AirLive OD-2060HD User’s Manual...
  • Page 50: System: Configure And Maintain System

    It’s a unique number of each device for identification and this ID is used for DIPS. In the Appendix G, it describes how to locate your device from Internet by DDNS service. However, we provide another easier way to do the same job called Dynamic IP Service, DIPS®. AirLive OD-2060HD User’s Manual...
  • Page 51 Log: User can check the system log information of the device, including the Main Info, Appended Info, Operator IP, and so on … Reload: Click this button; user can refresh the log information of the device. AirLive OD-2060HD User’s Manual...
  • Page 52: Date & Time

    Select an interval between 1 and 23 hours at which you want to adjust the device’s time referring to NTP server Time zone: Set the time difference from Greenwich Mean Time in the area where the device is installed. Daylight Saving: Disable or enable the daylight saving adjustment. AirLive OD-2060HD User’s Manual...
  • Page 53: Maintenance

    Backup Setting: To take a backup of all of the parameters, click this button. If necessary, it will then be possible to return to the previous settings, if settings are changed and there is unexpected behavior. AirLive OD-2060HD User’s Manual...
  • Page 54 (Note: that it must make sure that the Firmware only applies to this device, once update, it will be burned into FLASH ROM of system.) 5. Once the firmware file is selected, click on the “Firmware Upgrade” button. AirLive OD-2060HD User’s Manual...
  • Page 55 Furthermore, the firmware upgrade procedure always is risk and do not try to upgrade new firmware if it’s not necessary. System Restart: The device is restarted without changing any of the network settings. It means the IP address of the device will not change after firmware upgrade. AirLive OD-2060HD User’s Manual...
  • Page 56: Video: Configure Profile

    VGA but frame rate can be up to 30fps. User only can select either Mega-pixel or VGA mode to operate the camera. Switching Mega-pixel and VGA, the device will take time to reboot system. 4.4.1 Common AirLive OD-2060HD User’s Manual...
  • Page 57: Video Profile

    2 Mega mode, it can streams up to 1600x1200 resolution simultaneously. Text Overlay Setting: There are some important information can be embedded into image, including date, time, and/or text. 4.4.2 Video Profile Name: Assign a name to the selected profile. AirLive OD-2060HD User’s Manual...
  • Page 58 GOP Control: Defines the Intra/Inter-frame (I/P) ratio of this profile. For example, set the GOP to 30, then the video stream will have one Intra-frame every 30 frames. AirLive OD-2060HD User’s Manual...
  • Page 59: Roi

    4. Administrating the Device 4.4.3 ROI ROI means Region of Interest. Use this page to specify ROI window which ROI is QVGA resolution. AirLive OD-2060HD User’s Manual...
  • Page 60: Audio: Audio Parameters

    Mute While PT: Mute the audio while pan and/or tilt motion Audio Mode: To select Simplex or Full duplex (2-way audio) mode Input Gain: To adjust gain of input audio Output Gain: To adjust gain of output audio AirLive OD-2060HD User’s Manual...
  • Page 61: User: Manage User Name, Password And Login Privilege

    Administrator can access every function in this device. However, Viewers only can view the video and access limited function. PTZ Control: Authorize this user to control PTZ function or not. Add, update, and remove of Users account: Manage the user’s account of viewer user. AirLive OD-2060HD User’s Manual...
  • Page 62: E-Mail: Setup E-Mail Configuration

    SMTP Server: Type the SMTP server name or the IP address of the SMTP server. Test: Send a test mail to mail server to check this account is available or not. AirLive OD-2060HD User’s Manual...
  • Page 63 Type the password for the SMTP server if Authentication is Enable. E-mail To: Type the receiver’s e-mail address. E-mail From: Type the sender’s E-mail address. This address is used for reply e-mails. E-mail Subject: Type the subject/title of the e-mail. AirLive OD-2060HD User’s Manual...
  • Page 64: Object Detection: Setup Object Detection

    Included windows target specific areas within the whole video image Excluded windows define areas within an Include window that should be ignored (areas outside Include windows are automatically ignored) Name: Name of the specified motion window. AirLive OD-2060HD User’s Manual...
  • Page 65 The lower object size will even small objects trigger motion detection too. Generally speaking, the smaller size will be easier to trigger event. Sensitivity Defines the sensitivity value of motion detection. The higher value will be more sensitivity. AirLive OD-2060HD User’s Manual...
  • Page 66: Event Server: Setup Ftp/Tcp/Http/Samba Server Configuration

    User can specify multiple FTP paths as wish. Therefore, user needs to specify a name for each FTP setting. FTP Server: Type the server name or the IP address of the FTP server. Test: Check the FTP server whether this account is available or not. AirLive OD-2060HD User’s Manual...
  • Page 67: Tcp Server

    Set working directory path of FTP server. FTP Passive Mode: Select passive or active mode connecting to FTP server. 4.9.2 TCP Server In addition to send video file to FTP server, the device also can send event message to specified TCP server. AirLive OD-2060HD User’s Manual...
  • Page 68: Http Server

    The device also can send event message to specified HTTP server. Name: User can specify multiple HTTP servers as wish. Therefore, user needs to specify a name for each HTTP server setting. URL: Type the server name or the IP address of the HTTP server. AirLive OD-2060HD User’s Manual...
  • Page 69 Type the server name or the IP address of the HTTP Proxy. Proxy Login name: Type the user name for the HTTP Proxy. Proxy Login Password: Type the password for the HTTP Proxy. Proxy Port: Set port number of Proxy. AirLive OD-2060HD User’s Manual...
  • Page 70: Samba Server

    Check the SAMBA server whether this account is available or not. SAMBA Login name: Type the user name for the SAMBA server. SAMBA Login Password: Type the password for the SAMBA server. SAMBA Path: Set working directory path of SAMBA server. AirLive OD-2060HD User’s Manual...
  • Page 71: Event Schedule: Configure The Event Schedule

    Where the Schedule Trigger will be activated by user-define interval without event happened. Name: Name of the Event or Schedule. Enable: Enable or disable this Event or Schedule. Type: Event trigger or Schedule trigger. AirLive OD-2060HD User’s Manual...
  • Page 72 Send file to FTP server by motion triggered always: Select event trigger Enable time: start from 00:00 to 24:00 every day Trigger by: Motion Area (Added in Object Detection page) Action : Send FTP (Add in Event Server -> FTP Server page) AirLive OD-2060HD User’s Manual...
  • Page 73 Action : Send e-mail (Add in E-Mail page) To email address: You need to input the receiver email address. − Subject: You could specify the email subject. − Message: You could specify the email content. − AirLive OD-2060HD User’s Manual...
  • Page 74 Enable time: Select Monday to Friday, and set start time from 18:00 and keep work in 6 hous. Trigger by : You do not need to choose it, because this will be triggered every minute Action : Voice Alert AirLive OD-2060HD User’s Manual...
  • Page 75: Record

    User can choose the type of record file for event or schedule application. Record File Type: Choose JPEG, AVI-JPEG, or AVI-H.264 file format. Record File Prefix: Define the prefix of recorded filename. JPEG Picture Numbers: Define the picture numbers of JPEG to be sent out. AirLive OD-2060HD User’s Manual...
  • Page 76 4. Administrating the Device Pre-Trigger Duration: Define the maximum duration of pre-alarm. Post-Trigger Duration: Define the maximum duration of post-alarm. Max File Size: Define the maximum buffer size of record file. AirLive OD-2060HD User’s Manual...
  • Page 77: Appendix

    This Network Camera provides a general I/O terminal block as below: Function 12VDC power supply (50mA maximum) Digital Input Alarm Output User can refer to the schematic below to make a proper connection between I/O connector and external sensor and output device. AirLive OD-2060HD User’s Manual...
  • Page 78 THAT REQUIRE LARGE AMOUNTS OF CURRENT. IN SOME CASES, A CUSTOM INTERFACE CIRCUIT (CUSTOMER PROVIDED) MAY HAVE TO BE USED. SERIOUS DAMAGE TO NETWORK CAMERA MAY RESULT IF A DEVICE IS CONNECTED TO THE EXTERNAL I/O THAT EXCEEDS ITS ELECTRICAL CAPABILITY. AirLive OD-2060HD User’s Manual...
  • Page 79: Appendix B: Troubleshooting & Frequently Asked Questions

    If a firewall exists on the network, port 80 is open for installed and work if a ordinary data communication. The HTTP port and RTSP firewall exists on the port need to be opened on the firewall or NAT router. network. AirLive OD-2060HD User’s Manual...
  • Page 80 Please check user’s manual of router and turn on UPnP function. • Maybe UPnP function of NAT router is not compatible to the IP camera. Please contact your dealer to get the approval routers list. AirLive OD-2060HD User’s Manual...
  • Page 81 • The router needs Port Forwarding feature. Refer to your router's manual for details. • Packet Filtering of the router may prohibit access from an external network. Refer to your router's manual for details. • Access the Network Camera from the Internet with the AirLive OD-2060HD User’s Manual...
  • Page 82 Internet Explorer. Try to browse and log in again. Internet Explorer Setup the IE security settings or configure the individual displays the following settings to allow downloading and scripting of ActiveX message: “Your controls. current security settings prohibit downloading ActiveX controls”. AirLive OD-2060HD User’s Manual...
  • Page 83 • Click [Refresh] on the Internet Explorer when the (including Click to communication stops with the device. The image will Center and Preset refresh. Positioning) • Other clients may be operating Pan/Tilt. • Pan/Tilt operation has reached the end of corner. AirLive OD-2060HD User’s Manual...
  • Page 84: Appendix C: Ping Ip Address

    IP address is accessible by sending a packet to the specific address and waiting for a reply. It’s also a very useful tool to confirm the device installed or if the IP address conflicts with any other devices over the network. AirLive OD-2060HD User’s Manual...
  • Page 85: Appendix D: Bandwidth Estimation

    The required bandwidth depends on content of video source. The slow motion video will produce smaller bit rate generally and fast motion will produce higher bit rate vice versa. Actual results generated by the device may be varying. AirLive OD-2060HD User’s Manual...
  • Page 86: Appendix E: Specifications

    90°/ second (max); 1°/ second (min) Preset Points Up to128 preset point Camera Tour Up to16 tours IP Module Video Video Compress Simultaneously H.264, MPEG4 and MJPEG Format Video Profile Frame Rate 30fps Region of Interest Up to 5 configurable region AirLive OD-2060HD User’s Manual...
  • Page 87 Up to 10 zones FTP or NAS file upload E-mail alter Event handler HTTP, and TCP notification DO (digital output) alarm Move to preset position Video Buffer Pre- and post- alarm buffering General 256MB Flash 16MB AirLive OD-2060HD User’s Manual...
  • Page 88: Appendix F: Configure Port Forwarding Manually

    (1) Assign a local/fixed IP address to your device The device must be assigned a local and fixed IP Address that allows it to be recognized by the router. Manually setup the device with a fixed IP address, for example, 192.168.0.100. AirLive OD-2060HD User’s Manual...
  • Page 89 If you could not get a Static IP address from your ISP, the DIPS™ or DDNS is a solution alternatively. Please refer to Appendix G for more information. AirLive OD-2060HD User’s Manual...
  • Page 90 80 to something else, such as 8080. Not all routers are the same, so refer to your user manual for specific instructions on how to open ports. AirLive OD-2060HD User’s Manual...
  • Page 91: Appendix G: Ddns Application

    DSL or cable modem internet connection where your computer's IP address changes all the time!! DDNS service supports all top level domain names including but not limited to .com, .net, .org, .to, .uk etc. AirLive OD-2060HD User’s Manual...
  • Page 92 DDNS and PPPoE of the Networked Device in order to let the outside administrator be able to access through internet. Application Steps—DDNS & Domain Name (1). Visit the following web site: http://www.dyndns.org/ (2). Click “Account” AirLive OD-2060HD User’s Manual...
  • Page 93 (3). After the columns show up at the left side, click “Create Account”. (4). Fill the application agreement and necessary information. a. Username b. E-mail address and confirmation c. Password and confirmation d. Submit all the input information and finish creating an account AirLive OD-2060HD User’s Manual...
  • Page 94 5. Appendix Click these two options AirLive OD-2060HD User’s Manual...
  • Page 95 Information“. Click the hyperlink address to confirm the DDNS service that you just applied. Then DDNS you applied activated. Click to confirm (6). Enter the web page http://www.dyndns.org/ again. Input your username and password that you just applied to login administration interface of DDNS server. AirLive OD-2060HD User’s Manual...
  • Page 96 5. Appendix Input your account (7). If the correct username and password are input, you can see the following picture at the top-right of the login page. (8). Click the “Services”. (9). Click the “Dynamic DNS”. AirLive OD-2060HD User’s Manual...
  • Page 97 (Pink No.1) Then we pick a domain that is easy to remember. (Pink No.2) The 3rd step is to click “Offline Hostname” from Service Type. (Pink No.3) Finally, click the “Create Host” to submit the domain name information and finish DDNS application. (Pink No.4) AirLive OD-2060HD User’s Manual...
  • Page 98: Appendix H: Power Line Frequency

    *Neutral and line wires are reversed Argentina 220V 50 Hz from that used in Australia and elsewhere. *Outlets typically controlled by adjacent switch. Australia 230V* 50 Hz Though nominal voltage has been officially changed to 230V, 240V is AirLive OD-2060HD User’s Manual...
  • Page 99 50 Hz Portugal 230V 50 Hz Spain 230V 50 Hz Sweden 230V 50 Hz Switzerland 230V 50 Hz Taiwan 110V 60 Hz Thailand 220V 50 Hz *Outlets typically controlled by United Kingdom 230V* 50 Hz adjacent switch. AirLive OD-2060HD User’s Manual...
  • Page 100: Appendix I: 3Gpp

    2. Use the following URL to access: rtsp://host/mpeg4/media.3gp Where host is the host name or IP address of the camera. Compatible 3G mobile phone: Please contact your dealer to get the approved list of compatible 3G phone. AirLive OD-2060HD User’s Manual...
  • Page 101: Appendix J: Enable Upnp Of Windows Xp

    Appendix J: Enable UPnP of Windows XP Use the following steps to enable UPnP settings only if your operating system of PC is running Windows XP. Go to Start > Settings. Click Control Panel Click Add or Remove Programs AirLive OD-2060HD User’s Manual...
  • Page 102 5. Appendix Click Add/Remove Windows Components The following screen will appear: Select Networking Services Click Details AirLive OD-2060HD User’s Manual...
  • Page 103 5. Appendix Select Universal Plug and Play Click Ok Click Next AirLive OD-2060HD User’s Manual...
  • Page 104 5. Appendix Please wait while Setup configures the components. Click Finish AirLive OD-2060HD User’s Manual...

Table of Contents