AirLive IP-200PHD-24 User Manual
  1. Manuals
  2. Brands
  3. AirLive Manuals
  4. IP Camera
  5. IP-200PHD-24
  6. User manual

AirLive IP-200PHD-24 User Manual

2.0 mega pixel passive poe ip camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
 
 
 
 
 
IP-200PHD-24 /
IP-200PHD-24B
2.0 Mega Pixel Passive PoE
IPCamera
User's Manual
  i

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IP-200PHD-24 and is the answer not in the manual?

Questions and answers

Related Manuals for AirLive IP-200PHD-24

Summary of Contents for AirLive IP-200PHD-24

  • Page 1           IP-200PHD-24 / IP-200PHD-24B 2.0 Mega Pixel Passive PoE IPCamera User’s Manual   i...
  • Page 2 This product contains some codes from GPL. In compliance with GPL agreement, www.airlive.com AirLive will publish the GPL codes on our website. Please go to go to the "Support->GPL" menu to download source code. All Trademarks are properties of their respective holders.

  • Page 3: Fcc Statement

    IMPORTANT NOTE FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. AirLive IP-200PHD-24/IP-200PHD-24B User’s Manual...

  • Page 4: Table Of Contents

    Record ..................21 3.7.4 Volume..................22 3.7.5 About ..................23   4. Monitor the Image Section ................24 4.1 Monitor the Image Section..............24 4.2 Configure via Web UI ................25 4.2.1 Network..................25 4.2.2 DDNS..................27   iii          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...
  • Page 5 Object Detection ................52 4.6.5 Storage – Status and Configuration of SD card (POE-200PHD-24 Only) ............54 4.6.6 Recording List- Files List inside SD Card (IP-200PHD-24 Only) ..............55 4.6.7 Event Sever ................55 4.6.8 Event Schedule................60   5. Troubleshooting & FAQ ................66 5.1 Monitor the Image Section..............66...

  • Page 6: Introduction

    Internet Explorer you get instant, on demand video streams. Within minutes you can set up the device to capture a video sequence to a PC. The live video can be uploaded to a website for the world to see.   1          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...

  • Page 7: Features

    Microsoft Internet Explorer 6.0 or later Microsoft Media Player 11.0 or later (to playback recorded file) VGA Monitor resolution 1280 x 1024 or higher Pentium-4 3.6 GHz or higher Memory Size: 1GB or more Windows XP, Vista, 7 AirLive IP-200PHD-24/IP-200PHD-24B User’s Manual...

  • Page 8: Package Contents

    Note: This device works with 12 to 24 volt passive PoE. It does not work with 48V 802.3af switches. Do not plug in to 802.3af or 803.3at PoE switch, it can cost damage to the camera.   3          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...

  • Page 9: Physical Description

    The Camera has built-in an internal microphone. This microphone is hidden in the pinhole located on the front panel. 3. Micro SD Card Slot (IP-200PHD-24 Only) User can insert a micro SD card into this slot for event recording. IP-200PHD-24B AirLive IP-200PHD-24/IP-200PHD-24B User’s Manual...

  • Page 10: Bottom View

    The input power is 12VDC. Note that supply the power to the Camera with the power adapter included in package. Otherwise, the improper power adapter may damage the unit and result in danger.   5          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...

  • Page 11: Hardware Installation

    2. Place the Camera on the table or fix it onto ceiling or wall Use three screws to fix the Network Camera onto the ceiling or wall. You could also put the Network Camera on the table directly. AirLive IP-200PHD-24/IP-200PHD-24B User’s Manual...
  • Page 12 Camera’s bottom and attach it to the network. 4. Connect the external power supply to Camera Connect the attached power adapter to the DC power jack of the Network Camera.   7          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...
  • Page 13 AC power. 5. Use PoE-1P to connect to a network device. The IP-200PHD-24/IP-200PHD-24B is using DC 12V passive PoE and you can use PoE-1P as PoE splitter or PoE injector to connect to your network device and there is no need additional power adapter.

  • Page 14: Getting Started

    Cameras by IPWizard II or UPnP™ discovery. Here is the way to execute IPWizard II to discover Camera’s IP address and set up related parameter in a Camera.   9          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...
  • Page 15 2. Getting Started   When launch the IPWizard II, a searching window will pop up. IPWizard II is starting to search Network Cameras on the LAN. The existed devices will be listed as below. AirLive IP-200PHD-24/IP-200PHD-24B User’s Manual...

  • Page 16: View

    In case you want to change the IP related parameters of wired interface, please select the device you want to configure and click the LAN button. Relative settings will be carried out as below.   11          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...
  • Page 17 2. Getting Started   You could modify the relative settings of the selected device. Click “<<” button will quit the LAN setting procedure and click “>>” button will move to next page as below. AirLive IP-200PHD-24/IP-200PHD-24B User’s Manual...

  • Page 18: Upnp For Windows

    Camera will be very easy to be found. Please refer to Appendix I to enable UPnP settings only if your operating system of PC is running Windows XP. Note: Windows 2000 does not support UPnP feature.   13          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...

  • Page 19: Install The Ip Camera Behind Nat Router

    Installing the device with an UPnP router on your network is an easy 3–step procedure: (1) Enable UPnP option of your NAT router (2) Enable UPnP NAT traversal option of the Network Camera (default) (3) Access your Network Camera by DIPS AirLive IP-200PHD-24/IP-200PHD-24B User’s Manual...

  • Page 20: Configure Ip Camera Via Web Ui

    1. Start the web browser on the computer and type the IP address of the Camera you want to monitor as below: The Login Window of the Camera is prompted:   15          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...

  • Page 21: Login As User

    Password: airlive That’s, type in “admin” on the “USERNAME” as a default name and “airlive” on the “PASSWORD” as a default password. Click “OK” button to start the main menu. 3. According your browser’s security setting, the IE Web Page may prompt the “Security Warning”...

  • Page 22: Login As Administrator

    If you log in the Camera as the Administrator, you can perform all the settings provided by the device. Start-up screen will be as follow no matter an ordinary users or an administrator. ActiveX Control Monitor Image 2-Way Audio Full Screen   17          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...

  • Page 23: Configure The Camera

    3.4 Language The device could provide multiple languages to meet customer’s requirement. 3.5 Two-Way Audio The device supports 2-way audio function. User can chose to enable or disable this function by toggling the icon below. AirLive IP-200PHD-24/IP-200PHD-24B User’s Manual...

  • Page 24: Full Screen

    On the ActiveX control icon, click the LeftMouseButton, then a menu pop-up. This menu provides features that are unique to the ActiveX control. These features include: • “Digital Zoom”, • “Snapshot”, • “Record”, • “Volume”, • “About”   19          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...

  • Page 25: Digital Zoom

    3. Configure the Camera   3.7.1 Digital Zoom Click Digital Zoom to active this function as above. User can drag or scale the box over the video to adjust zoom ratio and position. AirLive IP-200PHD-24/IP-200PHD-24B User’s Manual...

  • Page 26: Snapshot

    OK to continue. If you like to retrieve the saved image, select the file to display the saved image by using any one of graph editing tools. 3.7.3 Record   21          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...

  • Page 27: Volume

    Volume Click Volume to activate this function. There are two control bars for speaker and microphone volume respectively. Scroll these control bars to adjust the audio attribute. Check the volume mute will mute the speaker output. AirLive IP-200PHD-24/IP-200PHD-24B User’s Manual...

  • Page 28: About

    3. Configure the Camera 3.7.5 About Click About to show this ActiveX information.   23          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...

  • Page 29: Monitor The Image Section

    Object Detection Setup Object detection Storage Status and configuration of SD card (IP-200PHD-24 Only) Recording List Files list inside the SD Card (IP-200PHD-24 Only) Event Server Setup FTP/TCP/HTTP server for event Event Schedule Configure the schedule while event triggered AirLive IP-200PHD-24/IP-200PHD-24B...

  • Page 30: Configure Via Web Ui

    If this device can not get an IP address within limited tries, the device will assign a default IP address, 192.168.1.100, by itself as the default IP address.   25          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...
  • Page 31 If multiple devices are installed on the LAN and also required to be accessed from the WAN, then the HTTP Port can be assigned as the virtual server port mapping to support multiple devices. Click “OK” to save and enable the setting. AirLive IP-200PHD-24/IP-200PHD-24B User’s Manual...

  • Page 32: Ddns

    IP addresses. If users want to set up a web or a FTP server, then the Dynamic Domain Name Server is necessary.   27          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...
  • Page 33 Server name: Choose the built-in DDNS server. DDNSHost: The domain name is applied of this device. User name: The user name is used to log into DDNS. Password: The password is used to log into DDNS. AirLive IP-200PHD-24/IP-200PHD-24B User’s Manual...

  • Page 34: Pppoe

    WAN through the xDSL modem. The procedures are • Connect to a LAN by DHCP or Fixed IP • Access the device; enter Setting Network PPPoE as below   29          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...

  • Page 35: Steaming

    Enter the RTSP port number to use. The default value is 554. RTP Port: Specify the range of transmission port number of video stream. The default range is 50000 to 50999. User can specify a number between 1024 and 65535. AirLive IP-200PHD-24/IP-200PHD-24B User’s Manual...

  • Page 36: Upnp

    (WAN) side of a NAT router. With NAT traversal properly configured, all HTTP traffic to an external HTTP port in the NAT router will be forwarded to the device.   31          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...
  • Page 37 Show the IP address and port for WAN access through Internet. If NAT traversal is configured successfully, user can use this IP address and port to access this device. The external IP address is not shown in case NAT traversal function is failed. AirLive IP-200PHD-24/IP-200PHD-24B User’s Manual...

  • Page 38: Bonjour

    IETF as part of the ongoing standards-creation process. Bonjour: To enable or disable the Bonjour service here. Friendly Name: Shows the friendly name of this device here.   33          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...

  • Page 39: Ip Filter

    SMTP Notification (e-mail): If enable this function, then the “Send to” and “Subject” fields need to be filled. Send To: Type the receiver’s e-mail address. This address is used for reply mail. AirLive IP-200PHD-24/IP-200PHD-24B User’s Manual...
  • Page 40 Set port number of TCP server. Message: The message will be sent to FTP server. HTTP Notification: If enable this function, then the fields below need to be filled.   35          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...
  • Page 41 Type the user name for the HTTP Proxy. Proxy Login Password: Type the password for the HTTP Proxy. Custom parameter: User can set specific parameters to HTTP server. Message: The message will be sent to HTTP server. AirLive IP-200PHD-24/IP-200PHD-24B User’s Manual...

  • Page 42: Camera - Adjust Camera Parameters

    Use this menu to set the functions of the camera parameters of the device. 4.3.1 Picture Rotation: Turn the “Mirror” and “Vertical Flip” On or OFF. The image will be overturned as below.   37          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...

  • Page 43: Privacy Mask

    To add or delete the privacy mask windows, user can specify up to 7 windows to mask the video captured by this device. By dragging mouse on the image, you can change the position and size of the selected window accordingly. AirLive IP-200PHD-24/IP-200PHD-24B User’s Manual...
  • Page 44 4. Monitor the Image Section Name: Name of the specified window. Level Defines the gray level of mask block. The lower value will be darker.   39          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...

  • Page 45: System - Configure And Maintain

    It’s a unique number of each device for identification and this ID is used for DIPS. In the Appendix G, it describes how to locate your device from Internet by DDNS service. However, we provide another easier way to do the same job called Dynamic IP Service, DIPS®. AirLive IP-200PHD-24/IP-200PHD-24B User’s Manual...
  • Page 46 The information will be shown on IPWizard II once the device is found. Software Version: This information shows the software version of the device. Network LED: To turn on or off Network LED.   41          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...

  • Page 47: Date & Time

    NTP Server: Type the host name or IP address or domain name of the NTP server. NTP sync. Interval: Select an interval between 1 and 23 hours at which you want to adjust the device’s time referring to NTP server AirLive IP-200PHD-24/IP-200PHD-24B User’s Manual...

  • Page 48: Maintenance

    Factory Default (Except the network setting): The unit is restarted and most current settings are reset to factory default val- ues. This action will not reset the network setting.   43          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...
  • Page 49 Download the latest firmware file from our website or your dealer. Unzip this firmware file to binary file and store it into your PC. Then follow the steps as bellows carefully: 1. Close all other application programs which are not necessary for firmware update. AirLive IP-200PHD-24/IP-200PHD-24B User’s Manual...
  • Page 50 System Restart: The device is restarted without changing any of the network settings. It means the IP address of the device will not change after firmware upgrade.   45          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...

  • Page 51: Video - Configure Profile

    VGA but frame rate can be up to 30fps. User only can select either Mega-pixel or VGA mode to operate the camera. Switching Mega-pixel and VGA, the device will take time to reboot system. 4.5.1 Common AirLive IP-200PHD-24/IP-200PHD-24B User’s Manual...

  • Page 52: Video Profile

    2 Mega mode, it can stream up to 1600x1200 resolution simultaneously. 4.5.2 Video Profile Name: Assign a name to the selected profile. Video Type: Video codec of the selected video profile. Resolution: Resolution of the selected video profile.   47          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...

  • Page 53: Roi

    Defines the Intra/Inter-frame (I/P) ratio of this profile. For example, set the GOP to 30, then the video stream will have one Intra-frame every 30 frames. 4.5.3 ROI means Region of Interest. Use this page to specify ROI window which ROI is QVGA resolution. AirLive IP-200PHD-24/IP-200PHD-24B User’s Manual...

  • Page 54: Audio - Audio Parameters

    4. Monitor the Image Section 4.6 Audio – Audio Parameters 4.6.1 Setting   49          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...

  • Page 55: Manage User Name, Password And Login Privilege

    Use this menu to add, update, or remove the usernames and passwords of the Administrator and viewer. Viewer login: Select “Anonymous” to allow any one viewing the video once connected. Otherwise, only users in database can view the video after login. AirLive IP-200PHD-24/IP-200PHD-24B User’s Manual...

  • Page 56: E-Mail

    That’s, if users want to send the alarm message out, it will need to configure parameters here and also add at least one event schedule to enable event triggering.   51          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...

  • Page 57: Object Detection

    Type the sender’s E-mail address. This address is used for reply e-mails. E-mail Subject: Type the subject/title of the e-mail. 4.6.4 Object Detection Use this menu to specify motion detection window 1 to window 10 and set the conditions for detection while observing a captured image. AirLive IP-200PHD-24/IP-200PHD-24B User’s Manual...
  • Page 58 Defines the object size of motion detection. The higher object size will only larger objects trigger motion detection. The lower object size will even small objects trigger motion detection too. Generally speaking, the smaller size will be easier to trigger event.   53          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...

  • Page 59: Storage - Status And Configuration Of Sd Card (Poe-200Phd-24 Only)

    Enable automatic disk cleanup: Delete old recorded files while the conditions are reached as below. Remove recordings order than: Delete old files by days. Remove oldest recordings when disk is: Delete old files by left capacity. AirLive IP-200PHD-24/IP-200PHD-24B User’s Manual...

  • Page 60: Recording List- Files List Inside Sd Card (Ip-200Phd-24 Only)

    FTP server, it will need to configure parameters here and also add at least one event schedule to enable event triggering as SMTP.   55          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...
  • Page 61 Check the FTP server whether this account is available or not. FTP Login name: Type the user name for the FTP server. FTP Login Password: Type the password for the FTP server. FTP Port: Set port number of FTP service. AirLive IP-200PHD-24/IP-200PHD-24B User’s Manual...
  • Page 62 TCP server setting. TCP Server: Type the server name or the IP address of the TCP server. TCP Port: Set port number of TCP server.   57          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...
  • Page 63 Check the HTTP server whether it is available or not. HTTP Login name: Type the user name for the HTTP server. HTTP Login Password: Type the password for the HTTP server. Proxy Address: Type the server name or the IP address of the HTTP Proxy. AirLive IP-200PHD-24/IP-200PHD-24B User’s Manual...
  • Page 64 HTTP server setting. SAMBA Server: Type the server name or the IP address of the SAMBA server. Test: Check the SAMBA server whether this account is available or not.   59          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...

  • Page 65: Event Schedule

    Where the Schedule Trigger will be activated by user-define interval without event happened. Name: Name of the Event or Schedule. Enable: Enable or disable this Event or Schedule. AirLive IP-200PHD-24/IP-200PHD-24B User’s Manual...
  • Page 66 Enable time: start from 00:00 to 24:00 every day Trigger by: Motion Area (Added in Object Detection page) Action : Send FTP (Add in Event Server -> FTP Server page)   61          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...
  • Page 67 3. Trigger by : Motion Area (Added in Object Detection page) 4. Action : Send e-mail (Add in E-Mail page) To email address: You need to input the receiver email address. Subject: You could specify the email subject. iii. Message: You could specify the email content. AirLive IP-200PHD-24/IP-200PHD-24B User’s Manual...
  • Page 68 3. Trigger by : You do not need to choose it, because this will be triggered every minute 4. Action : Voice Alert Note: Send SD function is only for IP-200PHD-24   63          AirLive IP-200PHD-24/IP-200PHD-24B  ...
  • Page 69 Choose JPEG, AVI-JPEG, or AVI-H.264 file format. Record File Prefix: Define the prefix of recorded filename. JPEG Picture Numbers: Define the picture numbers of JPEG to be sent out. Pre-Trigger Duration: Define the maximum duration of pre-alarm. AirLive IP-200PHD-24/IP-200PHD-24B User’s Manual...
  • Page 70 4. Monitor the Image Section Post-Trigger Duration: Define the maximum duration of post-alarm. Max File Size: Define the maximum buffer size of record file.   65          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...

  • Page 71: Troubleshooting & Faq

    • If the problem is not solved, the device might be faulty. Contact your dealer for further help. The network cabling is The device uses Category 5 UTP cable allowing 10 required for the device. and/or 100 Base-T networking. AirLive IP-200PHD-24/IP-200PHD-24B User’s Manual...
  • Page 72 UPnP NAT Traversal Can not work with NAT • Maybe NAT router does not support UPnP function. router Please check user’s manual of router and turn on UPnP function.   67          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...
  • Page 73 • The proxy server may prevent you from connecting directly to the Network Camera, set up not to use the proxy server. • Confirm that Default Gateway address is correct. • The router needs Port Forwarding feature. Refer to your router's manual for details. AirLive IP-200PHD-24/IP-200PHD-24B User’s Manual...
  • Page 74 Internet Explorer Setup the IE security settings or configure the individual displays the following settings to allow downloading and scripting of ActiveX message: “Your controls. current security   69          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...
  • Page 75 • Default Gateway and DNS server address should e-mail or FTP does not be set up correctly. work. • If FTP does not work properly, ask your ISP or network administrator about the transferring mode of FTP server. AirLive IP-200PHD-24/IP-200PHD-24B User’s Manual...
  • Page 76 Cannot play the Have installed Microsoft®’s DirectX 9.0 or later and recorded ASF file use the Windows Media Player 11.0 or later to play the AVI filed recorded by the Device.   71          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...

  • Page 77: Ping

    The replies, as illustrated below, will provide an explanation to the problem. If you want to detect any other devices conflicts with the IP address of Network Camera, also can utilize the PING command but you must disconnect the device from the network first. AirLive IP-200PHD-24/IP-200PHD-24B User’s Manual...

  • Page 78: Bandwidth Estimation

    128 kbps or lower connection. Even though the upload speed is more than 128kbps, for optimal video performance, disabling audio streaming will get better video performance.   73          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...

  • Page 79: Specification Table

    RTSP: G.711 64kbps, G.726 32kbps 3GPP: AMR Audio Streaming One-way or two-way Built-in microphone Microphone Audio Output Adjustable audio output gain Network IPv4, TCP, UDP, HTTP, HTTPS, SMTP, FTP, NTP, Supported Protocols DNS, DDNS, DHCP, DIPS, ARP, Bonjour, UPnP, RTSP, AirLive IP-200PHD-24/IP-200PHD-24B User’s Manual...
  • Page 80 Operating 20% ~ 80% (non-condensing) Humidity Dimension HxWxD:74.5 x 52.6 x 35..0 (mm) Viewing System Windows® XP, Vista, 7 Browser IE 6.0 or later, Firefox 2.0 or later, Safari   75          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...

  • Page 81: Configure Port Forwarding Manually

    The following steps generally apply to any router that you have on your network. The D-Link DI-624 is used as an example to clarify the configuration process. Configure the initial settings of the router by following the steps outlined in the router’s Quick Installation Guide. AirLive IP-200PHD-24/IP-200PHD-24B User’s Manual...
  • Page 82 Internet. The router connects to the Internet over a series of numbered ports. The ports normally used by the device are blocked from access over the Internet. Therefore, these ports need to be made   77          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...
  • Page 83 80, you will need to change the port the camera uses from 80 to something else, such as 8080. Not all routers are the same, so refer to your user manual for specific instructions on how to open ports. AirLive IP-200PHD-24/IP-200PHD-24B User’s Manual...

  • Page 84: Ddns

    (Note: This domain must be registered with Internic via registration authorities such as Network Solutions, DirectNIC, Register.com etc). Your domain name's dynamic IP address is automatically tracked by a DDNS server.   79          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...
  • Page 85 DDNS and PPPoE of the Networked Device in order to let the outside administrator be able to access through internet. 3. Application Steps—DDNS & Domain Name (1). Visit the following web site: http://www.dyndns.org/ (2). Click “Account” AirLive IP-200PHD-24/IP-200PHD-24B User’s Manual...
  • Page 86 5. Troubleshooting & FAQ (3). After the columns show up at the left side, click “Create Account”.   81          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...
  • Page 87 5. Troubleshooting & FAQ   (4). Fill the application agreement and necessary information. a. Username b. E-mail address and confirmation c. Password and confirmation d. Submit all the input information and finish creating an account Click these two options AirLive IP-200PHD-24/IP-200PHD-24B User’s Manual...
  • Page 88 (5). Check your e-mail mailbox. There will be an e-mail with a title “Your DynDNS Account Information“. Click the hyperlink address to confirm the DDNS service that you just applied. Then DDNS you applied activated. Click to confirm   83          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...
  • Page 89 DDNS server. Input your account (7). If the correct username and password are input, you can see the following picture at the top-right of the login page. (8). Click the “Services”. (9). Click the “Dynamic DNS”. AirLive IP-200PHD-24/IP-200PHD-24B User’s Manual...
  • Page 90 No.2) The 3 step is to click “Offline Hostname” from Service Type. (Pink No.3) Finally, click the “Create Host” to submit the domain name information and finish DDNS application. (Pink No.4)   85          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...

  • Page 91: Power Line Frequency

    COMMENTS Argentina 220V 50 Hz *Neutral and line wires are reversed from that used in Australia and elsewhere. Australia 230V* 50 Hz *Outlets typically controlled by adjacent switch. Though nominal voltage has been officially changed to AirLive IP-200PHD-24/IP-200PHD-24B User’s Manual...
  • Page 92 *Outlets typically controlled by adjacent switch. Though nominal voltage has been officially changed to 230V, 240V is within tolerances and commonly found. 120V 60 Hz United States of America   87          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...

  • Page 93: 3Gpp Table

    Please contact your dealer to get the approved list of compatible 3G phone. 5.9 UPnP Use the following steps to enable UPnP settings only if your operating system of PC is running Windows XP. Go to Start > Settings. Click Control Panel AirLive IP-200PHD-24/IP-200PHD-24B User’s Manual...
  • Page 94 5. Troubleshooting & FAQ Click Add or Remove Programs Click Add/Remove Windows Components   89          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...
  • Page 95 5. Troubleshooting & FAQ   The following screen will appear: Select Networking Services Select Universal Plug and Play AirLive IP-200PHD-24/IP-200PHD-24B User’s Manual...
  • Page 96 5. Troubleshooting & FAQ Click Details Click Next   91          AirLive IP-200PHD-24/IP-200PHD-24B   User’s Manual...
  • Page 97 5. Troubleshooting & FAQ   Please wait while Setup configures the components. Click Finish AirLive IP-200PHD-24/IP-200PHD-24B User’s Manual...

This manual is also suitable for:

Ip-200phd-24b

Table of Contents